Top-rated lead testing and removal specialists.

Get matched with top lead testing and removal specialists in Deforest, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your lead testing and removal project in Deforest, WI?

Select your specific project to find the pro for you.

Find Lead testing and removal specialists in Deforest

Avatar for Umbrella Environmental
Umbrella Environmental
5.0(
28
)

Serving Deforest, WI and surrounding areas

Approved

Super Service Award Winner

In business since 2010

Free estimates

Emergency services offered

"Highly recommended. We needed our attic tested for Asbestos before putting new roof and insulation in. Todd returned my call immediately, patiently answered all of my questions and tested the attic next day. This was great, because the roof was going up 3 days later! Luckily there was no asbestos and we could proceed with the work. I’m very grateful for Todd and Umbrella Environmental."
Rec Room - Before.  This is the room before any work was performed.
Asbestos containing wrap on ductwork - Before
Rec Room - After.  The asbestos containing floor tile and the asbestos containing mastic was removed from this basement located in Milwaukee, WI.
Ductwork with asbestos wrap removed.
The adhesive used on the wood furring strips contained asbestos and needed to be removed by Umbrella Environmental Services.

+11

9 neighbors recently requested a quote
Recommended by70%of homeowners
Lead Testing and Removal questions, answered by experts

Professional testing for lead paint costs about $300, ranging from about $250 to $700, depending on the square footage, accessibility, and location. However, testing for lead paint with a DIY home-testing kit costs about $25, but doesn’t guarantee accurate results. The U.S. Environmental Protection Agency (EPA) recommends using a lead test kit that complies with the Lead Renovation, Repair, and Painting (RRP) Rule, which has strict criteria for ensuring a more accurate reading.

Common home surfaces to test for lead include:

  • Walls

  • Windows

  • Doors

  • Molding and trim

  • Railings

Some of the signs that could mean your water is contaminated, such as cloudiness or bubbliness, could also be non-problems that don’t affect your water’s potability. However, if your water smells or tastes strange, it’s a good idea to stop drinking it and test it immediately. If your well water is contaminated, the best way to discover that is to test it.

DIY kits are available for basic air quality testing, but professional services provide more comprehensive results and recommendations. While a DIY kit may seem cost-effective, a professional assessment is more thorough. Inspectors are better equipped to catch all pollutants and hazards, and you'll still need a professional to verify and act on DIY test results. Furthermore, some kits don't test for certain pollutants or only detect their presence without measuring specific levels (like mold spores). It's generally better to opt for a detailed professional assessment.

Several different measurements may be used to determine the amount of lead in water. The most common unit of measurement is micrograms per liter (µg/L), which is the same as parts per billion. Another measurement is milligrams per liter (mg/L), which is the same as parts per million.

Unfortunately, lead dust does not look different from any other type of dust. You cannot detect it with the naked eye. To determine if you have lead dust in your home, you will need to hire a local company to take a sample from the paint and test it for you in a lab.

The Deforest, WI homeowners’ guide to lead testing and removal services

From average costs to expert advice, get all the answers you need to get your job done.