Top-rated lead testing and removal specialists.

Best lead testing and removal specialists near Merrimac, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your lead testing and removal project in Merrimac, WI?

Select your specific project to find the pro for you.

Top-Rated Lead testing and removal specialists in Merrimac - Updated Nov 2026

Avatar for Umbrella Environmental
Umbrella Environmental
5.0(
28
)
Toxic Lead - Abatement

Serving Merrimac, WI and surrounding areas

Approved

Super Service Award Winner

In business since 2010

Free estimates

Emergency services offered

"Highly recommended. We needed our attic tested for Asbestos before putting new roof and insulation in. Todd returned my call immediately, patiently answered all of my questions and tested the attic next day. This was great, because the roof was going up 3 days later! Luckily there was no asbestos and we could proceed with the work. I’m very grateful for Todd and Umbrella Environmental."
Rec Room - Before.  This is the room before any work was performed.
Asbestos containing wrap on ductwork - Before
Rec Room - After.  The asbestos containing floor tile and the asbestos containing mastic was removed from this basement located in Milwaukee, WI.
Ductwork with asbestos wrap removed.
The adhesive used on the wood furring strips contained asbestos and needed to be removed by Umbrella Environmental Services.

+11

Response time1 day
Response rate100%
11 neighbors recently requested a quote
Lead Testing and Removal FAQs, answered by experts

A professional indoor air quality inspection takes anywhere from one to three hours, depending on the size of your home and the number of necessary samples. After the test, the specialist will discuss the findings, but you won’t get a full written report for 2 to 10 days, though you can ask your pro to expedite the process, if needed. 

Testing typically costs between $200 and $600, depending on the number of samples and laboratory analysis.

You can paint over lead paint, or “encapsulate” it with a special paint that includes an ingredient called an encapsulant. The EPA approves encapsulation as a lead paint removal method as long as the paint remains undisturbed. Standard types of paint without an “encapsulant” from the big box stores or hardware stores do not meet EPA standards for remediation of lead-based paint.

Properties should be tested for lead every 2-3 years, especially if they are older, have undergone renovations, or show deterioration of paint or interior finishes.

Several different measurements may be used to determine the amount of lead in water. The most common unit of measurement is micrograms per liter (µg/L), which is the same as parts per billion. Another measurement is milligrams per liter (mg/L), which is the same as parts per million.

The Merrimac, WI homeowners’ guide to lead testing and removal services

From average costs to expert advice, get all the answers you need to get your job done.