Best toilet pros near Roanoke, VA

You generally cannot replace a 10-inch rough-in toilet with a 12-inch model without making significant plumbing updates. A 12-inch rough-in toilet will not fit a 10-inch rough-in space because the floor drain is in the wrong position. To accommodate the larger toilet, you would need to move the drainpipe, which could cost between $0.75 and $30 per linear foot, plus labor. In most cases, it is more cost-effective and simpler to purchase a new 10-inch rough-in toilet. However, it is possible to install a 10-inch rough-in toilet in a 12-inch space by using a longer connector.

To test for toilet leaks, use water coloring in the water tank and see if the water slips into the bowl from the tank. This test will indicate if there’s a problem with the flapper or refill tube. You can also put water coloring in the bowl of the toilet to see if there is a leak there. If there is, you should see the colored water on the outside of the toilet bowl or on the floor. 

Yes, frozen pipes can cause a toilet to stop working correctly. If the pipes are frozen, water cannot flow, which can lead to two main problems. First, the supply line to the toilet tank may be frozen, which prevents the tank from refilling with water after you flush. Second, the drain pipe itself can freeze, blocking water from flushing away. As a temporary solution for a non-refilling tank, you can manually add water, but this is not a long-term fix. To clear a frozen drain pipe, you can try pouring warm water into the toilet bowl or tank and then flushing, as the warm water may help thaw the ice blockage. Ultimately, the best course of action is to unfreeze the affected pipes to restore your toilet to full functionality.

First, check that you have cut off the water supply to your toilet. This is a project that can only be done safely if running water cannot reach your toilet fixture. If you're seeing water trickle out after you've confirmed that the water supply is shut off, you can probably rest assured that what you're seeing isn't a problem. It's common for leftover water to spill out when you're removing your toilet's fill valve. If something goes wrong while you're working on your toilet, you'll need to look at your home's policy to see if your homeowner insurance covers water damage.