Get matched with top snow removal pros in Nickelsville, VA

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.

Removing snow from your roof can help prevent ice dams, but the best thing to do is address insulation issues in your attic. If you do decide to remove the snow manually, you should always use a roof rake rather than a shovel. You shouldn’t climb your snowy roof in any circumstance, and roof rake allows you to remove the snow from the ground or a ladder. For the best results, remove snow as soon as possible after it falls.

That depends on the size of your snow blower and how efficiently it uses fuel. Most snow blowers will last between 1 and 2 hours on a full tank of gas. Larger blowers tend to use fuel more quickly and need refilling more often.

Keep in mind, the average snow blowing project for a home driveway takes around 30 minutes. Large driveways and yards will take around an hour. A full tank of gas should be more than enough for snow removal, although the height of the snowfall will have an effect, too.

Some commercial services use sand when clearing ice, but that’s to add instant traction, not to melt the ice. While you can scatter kitty litter, sand, or similar substances on steps, paths, or porches to improve safety during icy conditions, they won’t help melt hardened ice. Rely on salt or other de-icing methods to fully melt away stubborn ice.