Best carpenters near Nassawadox, VA

"Simms renovation LLC did a amazing job framing up my porch.The communication was everything for me, and they succeeded while still finishing the project on time I would recommend them to anyone and everyone"

"It is with deep satisfaction that I recommend Grady?s Painting and Plastering & Construction. Mr. George Grady is a skilled craftsman. He was hired to correct long neglected and extensive masonry and window issues on a large, beautiful Presbyterian Church built in the Civil War era in Philadelphia. The property was neglected with only minimal maintenance performed over the last 40+ years. The building was in severe decline and in need of stabilization and restoration on many fronts. Cracked ledge plates were chipped out and reestablished, internal walls damaged by leakage were broken out and repaired, brickwork was repointed and in severe cases reestablished to original strength and beauty. Leaks around the base of the building were addressed to stabilize deterioration of the foundation. Large rotted window sills under beautiful stained glass windows were restored after significant masonry reestablishment due to water damage under the rotted out sills. Broken and missing stained glass windows are in the process of repair and replacement. The process started with new metal frames cast by Mr. Grady. The new frames will hold clear painted replications of the original stained glass, also crafted by Mr. Grady. Regular windows all around the church and manse were also repaired and restored. Roof leaks were accurately identified and repaired. A sagging plaster ceiling has been torn out and restored. All this work was done by Mr. Grady alone or with an occasional helper. He worked with care, expertise and respect for the original structure. The results far exceeded our expectations and have injected new life into a building on the brink. This building, owned by the Presbytery of Philadelphia, now houses a new urban ministry in a newly gentrifying area of the city. We are happy to have had the good fortune to be connected to Grady's Painting and Plastering & Construction"

I am a licensed electrician with extensive experience in residential, commercial, and light industrial electrical work. Skilled in installations, repairs, troubleshooting, panel upgrades, lighting systems, and code-compliant wiring, I prioritize safety, quality, and reliable service for every project. Committed to delivering efficient solutions and upholding the highest professional standards.​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

Joe of all trades

Handyman

With over 15 years of experience as a field technician in the cable, internet, and communications industry, I bring extensive technical expertise to every project. For the past 8 years, I've expanded my skills as a full-time general handyman, helping homeowners with a wide variety of repairs, installations, and home improvement projects.\n\nI can handle most small to medium-sized jobs, but my specialties include electrical work, smart home installation, home networking, audio/video systems, TV mounting, security devices, and custom solutions that make your home more functional, convenient, and comfortable. I take pride in solving problems that others can't, providing quality workmanship, honest communication, and dependable service on every job.

"First, I would like to say that Wilson Delgado was a delight to deal with--good-natured, patient, positive, and accommodating. He obviously takes great pride and care in his work. In this case, he didn't know what he was getting into--this was his first experience repairing a futon frame (an old one at that). The job required disassembling the frame in order to transport the base to his shop. This was not an easy repair. The main supporting cross piece had cracked, and it required creative thinking to devise a solution for repairing and reinforcing the broken piece. He spent a lot of time on this job--including spending extra time to reinforce the other end, which he discovered was cracked as well. He also went to the trouble to try to locate a replacement washer. He and his assistant delivered the frame (for consultation, pick-up, and delivery, he accommodated our work schedules and came in the evening). It took all four of us to figure out how to reassemble the frame, a rather frustrating experience, but Wilson and his assistant both remained calm and we did it! 
I should add that this was an Angie's List Big Deal ($99 for $200 worth of furniture restoration, repair, or refinishing), which turned out to be well worth the price--certainly a better deal for us than it was for Wilson. But despite the fact that it took him more time than expected, he did not ask for more money, which was very generous. We paid an additional $60 for pick-up and delivery of the futon frame.
"

"eltThe entire job was done while we were out of town.  This was our 2nd home, and we picked the color shingles and gave them a key to the property.  Since it was raining on the day they were to install, they put the shingles in the garage.  The next day, they installed the roof.  My associate went to the house that afternoon, and they were almost finished.  They cleaned up the debris and hauled everything away.  I had previously hired them to replace a roof on my apartment building, and so I was already impressed with their work.
"

Walls Construction and Handyman is your trusted handyman company serving all of the Northern Virginia area. From gutters to carpentry....Walls Can Do It All! We understand your expectations, our quality workmanship and attention to detail is standard on every job.We leave only when you are completely satisfied.

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"