Get matched with top carpenters in Melfa, VA

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"It is with deep satisfaction that I recommend Grady?s Painting and Plastering & Construction. Mr. George Grady is a skilled craftsman. He was hired to correct long neglected and extensive masonry and window issues on a large, beautiful Presbyterian Church built in the Civil War era in Philadelphia. The property was neglected with only minimal maintenance performed over the last 40+ years. The building was in severe decline and in need of stabilization and restoration on many fronts. Cracked ledge plates were chipped out and reestablished, internal walls damaged by leakage were broken out and repaired, brickwork was repointed and in severe cases reestablished to original strength and beauty. Leaks around the base of the building were addressed to stabilize deterioration of the foundation. Large rotted window sills under beautiful stained glass windows were restored after significant masonry reestablishment due to water damage under the rotted out sills. Broken and missing stained glass windows are in the process of repair and replacement. The process started with new metal frames cast by Mr. Grady. The new frames will hold clear painted replications of the original stained glass, also crafted by Mr. Grady. Regular windows all around the church and manse were also repaired and restored. Roof leaks were accurately identified and repaired. A sagging plaster ceiling has been torn out and restored. All this work was done by Mr. Grady alone or with an occasional helper. He worked with care, expertise and respect for the original structure. The results far exceeded our expectations and have injected new life into a building on the brink. This building, owned by the Presbytery of Philadelphia, now houses a new urban ministry in a newly gentrifying area of the city. We are happy to have had the good fortune to be connected to Grady's Painting and Plastering & Construction"

"First, I would like to say that Wilson Delgado was a delight to deal with--good-natured, patient, positive, and accommodating. He obviously takes great pride and care in his work. In this case, he didn't know what he was getting into--this was his first experience repairing a futon frame (an old one at that). The job required disassembling the frame in order to transport the base to his shop. This was not an easy repair. The main supporting cross piece had cracked, and it required creative thinking to devise a solution for repairing and reinforcing the broken piece. He spent a lot of time on this job--including spending extra time to reinforce the other end, which he discovered was cracked as well. He also went to the trouble to try to locate a replacement washer. He and his assistant delivered the frame (for consultation, pick-up, and delivery, he accommodated our work schedules and came in the evening). It took all four of us to figure out how to reassemble the frame, a rather frustrating experience, but Wilson and his assistant both remained calm and we did it! 
I should add that this was an Angie's List Big Deal ($99 for $200 worth of furniture restoration, repair, or refinishing), which turned out to be well worth the price--certainly a better deal for us than it was for Wilson. But despite the fact that it took him more time than expected, he did not ask for more money, which was very generous. We paid an additional $60 for pick-up and delivery of the futon frame.
"

Founded on the philosophy of hard work, attention to detail, and building long-lasting relationships, our clients prefer us because we offer a unique blend of expertise and custom-tailored service. \n

K&M Quality Carpentry, LLC is a privately owned business with more than 20 years in the\nresidential construction and remodeling business. Have been doing business VA, MD, and the\nDistrict of Columbia since 1994.\n• Contractor\nAs your Contractor, we focus on all the project details to ensure a satisfactory outcome\nfor you. We ensure that all permits for each phase of the project meet or exceed state and\nmunicipal building codes.\nK&M Quality Carpentry, LLC serves as a sub-contractor for many General Contractors\nin the area.\nWe pride ourselves on all the projects we undertake and focus on delivering quality and\nsatisfaction.\n• Repair and upgrades\nNew Customs Homes\nRoofing Flooring\nSiding Doors\nWindows Decks\nPorches Int/Ext Painting\nInsulating Garages\nGazebos Saunas\nCustom Cabinetry Custom Trim\nWood Ceilings Additions\nRemodeling (specializing in Kitchens & Bathrooms)\nIf you have a project or repair that doesn't appear on this list, contact me and I’ll try to meet your\nneeds or refer you to someone who specializes that particular area.\nLicensed (Class A) & Fully Insured

Walls Construction and Handyman is your trusted handyman company serving all of the Northern Virginia area. From gutters to carpentry....Walls Can Do It All! We understand your expectations, our quality workmanship and attention to detail is standard on every job.We leave only when you are completely satisfied.

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"It was okay but the woman who came out was a little bit too concerned about speaking her own mind and I do not think that the time frame was long enough for her to really get a grasp of what it was that we were looking to do. She had some good ideas but it was not enough to convince me to go further and purchase an additional time, however, we had a particularly challenging project. It was not like it was a simple little thing and I threw a lot at her. She was not particularly prepared when she came so we had to spend part of the time getting her prepared. I had sent her an email in advance with the pictures and everything and said, "Here, so that you are going to be thinking about this before our call." And when she got on there, she had not really done that. So, that took some of the time for me to go and say, "Okay, take a look at the email. Here are the pictures." She did not come ready to go with advice and that was a little bit disappointing. The advice that she had was good but it did not solve my problem and it did not convince me to purchase additional time. I was not unhappy with her. It just did not wow me. It was what it was and it was fine. She came out within the time frame that we purchased the deal because we had just purchased the house. We were living in North Carolina and we purchased the house in Florida. We moved on December 2nd so it was between the date that we purchased the deal and December 2nd because we had to talk to her about what we wanted to change about the house before we moved. Ours was not your typical project. If somebody came in and just showed her a picture of a room with blank walls and they wanted her to help decorate it, I think that she could do that but ours was pretty hard."

"It went very, very well. Mr. Wayland was polite, professional and very personable. He showed great knowledge in all areas
regarding the different projects .He did an outstanding job with everything. He was very tidy and conscientious. Very reasonable
in his prices. I am now going to contract him to stain and repair my deck and build  wood siding around my chimney, I know it will
look great !"

We are a Family owned Home Improvements / Handyman Company who is passionate about providing top quality work at a fair and reasonable price. No Job Is Too Small!!!