Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Gretna, VA

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Gretna, VA?

Select your specific project to find the pro for you.

Verified Reviews for Deck Maintenance pros in Gretna, VA

*The Angi rating for Deck Maintenance companies in Gretna, VA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Deck Maintenance needs.

*The HomeAdvisor rating for Deck Maintenance companies in Gretna, VA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Deck Maintenance needs.

Last update on August 20, 2024

Find Deck maintenance specialists in Gretna

Showing 1-10 of 11
Deck Maintenance questions, answered by experts

The best time to paint your deck is when temperatures are neither too cold (below 60 degrees) nor too hot (above 85 degrees). Always paint your deck when there’s no risk of rain. For fast-drying paint like acrylic or latex, ensure your deck can dry for at least four hours. Oil-based paints take longer to dry and may require 48 hours to completely cure.

You can nail or screw composite decking, but 3-inch decking screws are the better fastener choice. Unlike nails, decking screws won’t back out of the composite material over time. There’s also little danger of splitting composite material when driving screws, so you don’t need to pre-drill holes unless otherwise recommended by your decking manufacturer.

For the best results, stay off of your deck for at least 48 hours after sealing it. Giving the sealant at least two full days to cure ensures it can fully penetrate the wood, giving you the most protection from sun and weather damage later on. Walking on the deck too soon can prevent it from properly curing and cause your deck to weather prematurely.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Building a deck without a permit could lead to fines for both the homeowner and the contractor. The exact penalties will depend on your state and municipal building laws. You might also be required to remove the deck and apply for a permit before you can build another. While it might be tempting to skip the permit to save a few bucks, it’ll cost you much more if you’re caught.

The Gretna, VA homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles