Get matched with top roofers in Glade Hill, VA

The best way to prevent wind damage to your roof, especially if you live in an area prone to hurricanes, tropical storms, or tornadoes, is to invest in a roofing product with high wind resistance. Look for the ASTM D3161 and ASTM D7158 ratings to see the specific wind speeds your roofing product can withstand. Impact-resistant shingles have the highest wind resistance ratings and will give you the best chance of avoiding wind damage.

Sticky shoes help, but you shouldn't be walking on the steel roof— let the pros do that. it's dangerous enough to walk on asphalt shingled roofs which have quite a bit of texture. Stone coating adds a lot of grip, but it still doesn't lock your foot down, so if you absolutely have to be on the roof, make sure you’re secured in another way, like with the harness and rope.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.