Get matched with top roofers in Salem, UT

You can walk on a TPO roof, but you should only do so when necessary and wear footwear that’s less likely to puncture the surface. If you anticipate needing to frequently walk on your TPO roof, reinforce walkways to protect against punctures. TPO roofing can also be slippery, so in most cases, you’ll want to leave walking on it to the pros.

Asphalt roofs provide better insulation than metal roofs, but that doesn’t always mean that asphalt roofs are better for reducing heating and cooling bills. In hotter climates, metal roofs will usually be better for home efficiency because the material reflects more sunlight and reduces solar heat gain. In colder climates, asphalt roofs are sometimes superior in terms of efficiency because they introduce more solar heat gain to your home and have greater insulating capabilities. However, metal roofs installed with an air gap can provide similar levels of insulation.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

The cost to replace a roof typically ranges from $8,700 to $22,000, with a national average of around $9,200. The total cost depends on the size of your roof and whether you need a full replacement or can simply place new shingles over the old ones. A full replacement, which is necessary if the roof is several decades old or has multiple layers, is more expensive. This process involves tearing off the old roofing materials, inspecting and repairing the underlying structure, and then installing the new roof.