Get matched with top concrete resurfacing pros in Prosper, TX

You can dry pour concrete over existing concrete, but it’s best to use wet pour concrete instead. Dry pour concrete is easier to apply, but in order for new concrete to adhere to old concrete, it needs the right mixture for slow, uniform curing. Additionally, dry pour concrete is less durable and less resistant to cracking and concrete sinking, so dry pouring over an existing slab may result in surface imperfections appearing prematurely.

While you don’t technically need to grind concrete before resurfacing, it is very helpful. Grinding creates a rough, porous surface on the concrete, which gives the resurfacing material something to latch onto. Grinding your concrete before resurfacing can ensure that your resurfacing material lasts longer, reducing additional concrete resurfacing costs down the line.

The best way to resurface a concrete porch is to clean and prep the surface, pour a layer of concrete on top, allow it to cure, then seal it. A concrete overlay provides a durable layer and enhances your porch's look. You can even choose a stamped overlay to make it look like stone or brick. To ensure structural integrity, repair concrete cracks before applying the new concrete. If the existing concrete is in significant disrepair, consider removing and replacing the concrete instead of an overlay.

Concrete resurfacing and concrete overlay are terms often used interchangeably to describe the process of applying a new, thin layer of pre-blended concrete over an existing slab. This process enhances the durability and appearance of the concrete, giving it a fresh look without the high cost of a full replacement. The new layer is typically between 1/4-inch and 1-inch thick, significantly less than the 4 inches required for a new slab, and can be stamped, colored, or textured for a custom finish.

While the terms are often considered the same, their meaning can sometimes vary by contractor. Some may use "overlay" to describe a thicker application that adds structural integrity, while "resurfacing" might refer to a thinner layer intended for cosmetic upgrades. Other common names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.