On 10/23/14, the pipe used to connect the catalytic converter failed in the mountains in New Mexico. I had to drive for over an hour to get back to the small town I was staying in; the following morning, I had to drive for another hour to a shop in Santa Fe for repairs. What should have been a simple repair (replacing the broken pipe) was complicated because incorrect bolts had been used in the exhaust flange; bolts had to be tapped out and replaced, along with removing the broken pipe and welding a new one in place. The repair took the better part of the day, costing me a day's work and making it necessary to juggle my hotel reservations and travel plans. It was also noted that the u-joints were about to fall out of my truck - it would have been great to lose a drive-train on some mountain road....or a highway. When I returned to Texas, I contacted Bill Cabaj, Allstate owner, on 10/30/14. I explained the problem with the pipe/bolts and texted him pictures of the failed/incorrect parts and of the completed repair. I also mentioned that his shop had failed to service my transmission & differential, and that two other drive belts and the u-joints had to be replaced in Santa Fe - money that his shop could have collected had they thoroughly examined my truck as requested. I asked for a refund of the pipe repair only - $189.95. Bill stated that they subcontract exhaust work and he would have to talk to his subcontractor. I waited until 11/5/14 and did not hear from Allstate; I called and left a message for Bill - my call was not returned. On 11/10/14 I called again, left a message inquiring whether any action would be taken regarding a refund and asked for a call back. I have not been contacted. I can only conclude that my <$200.00 repair expense due to a faulty part/repair is less important to Allstate than my >$2000.00 initial repair was. VERY DISAPPOINTING EXPERIENCE.
11/20/14 Bill called and we discussed; he had contacted the subcontractor and expressed concern that the converter might have been affected by the high altitude (mountains) and said he would like to take a look at it to make sure it is ok. He also stated that he would mail a check to refund my out-of-pocket repair in New Mexico. I stated that I've had no problems with the truck since the New Mexico repair and we concluded the converter is probably ok and doesn't need to be checked at this time.
On 12/1/14 I called to check the status of the reimbursement; Bill said the check would be mailed that day.
On 12/3/14 I received a check for $190.00. I appreciate the reimbursement and the concern for proper operation of the converter.
"},"url":"https://www.angi.com/companylist/us/tx/desoto/allstate-transmissions-and-auto-repair-reviews-4300305.htm"},"position":8},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"MEINEKE CAR CARE CTR","address":{"@type":"PostalAddress","addressRegion":"TX","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Kat L."},"reviewBody":"Thank goodness I found this shop!!! Another shop had performed work on my truck in August; that repair failed as I was driving through New Mexico. I called Meineke and described my problem, and explained that I was traveling; I spoke with Ramon, who told me to come on in and they would take care of it. When I arrived at the shop, Ramon made sure my truck was on the rack quickly - he told me they would get me right out, as he knew I was traveling. Unfortunately, the repair took much longer than anticipated because of shoddy repair work in August - bolts had to be tapped out and it was time-consuming. Ramon (who is the co-owner of the shop) kept me fully apprised of the progress and problems; we also discovered the u-joints needed to be replaced, which was a blessing to me - I could have been stranded or worse had the u-joints failed while I was driving. While it's never pleasant to be faced with the hassle and expense of car problems, it's very worrisome when you are in a strange town and you and quot;take your chancesand quot; with a repair facility. EVERYONE at this Meineke was exceptional!!! The technicians were polite, professional, thorough and friendly. Ramon was an absolute delight - he willing and cheerfully showed me the repairs in process and made every effort to ensure that I felt comfortable with the work being done. I HIGHLY recommend this shop
"},"url":"https://www.angi.com/companylist/us/nm/santa-fe/meineke-car-care-ctr-reviews-5144772.htm"},"position":9},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Ernie's Plumbing Service Inc","address":{"@type":"PostalAddress","addressRegion":"TX","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Jason S."},"reviewBody":"Archie (Tech 402) was professional, efficient, and his repair job was top-notch. He was also very courteous fielding my questions. Ernie's Plumbing provides honest service with a fair price. I highly recommend them. "},"url":"https://www.angi.com/companylist/us/tx/arlington/ernie%27s-plumbing-service-inc-reviews-360096.htm"},"position":10}]}
Sewer Line Repair reviews from real Angi homeowners in Frost, TX
prompt and kept me updated on when part would arrive and could get repaired..very knowledgable and friendly...would highly recommend!!!
John O.
5.0
07/2023
We had a major drainage issue - no storm sewers in our neighborhood. NTX installed two in driveway grate drains, ran pipe to natural drain area, installed a decorative rock "stream" to direct water away from our foundation and garage. Very professional and timely, work looks great...
Nancy A.
5.0
06/2022
Very proffesional and fast. He even called me back two days after the repair to make sure it was running correctly. Best service I have ever hired. I will only use A &D Heating and Air Conditioning for now on.
Chad was fantastic and honest. He came originally to fix the plumbing in our bathroom and laundry room addition but we asked him to install a faucet, fix a faucet, clean our sewer lines and remove a gas line. The addition plumbing and the gas line required him digging a trench under the house...
Kat L.
4.0
11/2014
Left my SUV at the shop for over two weeks; requested that transmission & rear end be serviced and truck inspected for anything that needed to be done as I travel and don't want to be on the road with auto problems. Neither the transmission nor the differential were serviced. On 10/23/14,...
Licensed Master Plumber & Handyman located in Corsicana and servicing surrounding areas. 45 years experience, 5 star rating, I do what I say I will do when I say I will do it. All work Guaranteed.
"Great. He met all my expectation. Will hire again for future needs."
Lisa T on October 2025
Licensed Master Plumber & Handyman located in Corsicana and servicing surrounding areas. 45 years experience, 5 star rating, I do what I say I will do when I say I will do it. All work Guaranteed.
"Great. He met all my expectation. Will hire again for future needs."
Ellis County Climate Control, LLC is dedicated to providing our clients with the very best in installation, service, and repair for your heating and cooling needs. Our company is built on honesty and integrity. We specialize in central A/C and cooling systems, refrigeration, as well as heating and furnace systems. We take pride in the quality of our work and our commitment to outstanding results. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.
"Very professional ,good customer service reasonable price."
Margaret C on December 2019
Ellis County Climate Control, LLC is dedicated to providing our clients with the very best in installation, service, and repair for your heating and cooling needs. Our company is built on honesty and integrity. We specialize in central A/C and cooling systems, refrigeration, as well as heating and furnace systems. We take pride in the quality of our work and our commitment to outstanding results. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.
"Very professional ,good customer service reasonable price."
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
"Ari promised us to complete our project (which included kitchen, guest bath, master bath, laundry room and deck) in 6 weeks. They were done early and we're very pleased with the results. The crew was here almost every day, working on the project. We had a major water issue that soaked the carpet in the master bedroom and Ari was quick to assure us they would replace the flooring in the bedroom. Any issues they encountered were taken care of with no additional cost over what we were quoted up front.
Cabinets and countertops are GORGEOUS! Very, very pleased with the custom pantry they had built for my kitchen!
Our only negative was the language issue as most of the crew didn't speak English. But we were able to communicate well enough to accomplish what was needed.
We would use Finecraft again if we do any further remodeling.
Pictures attached.
"
Debbie F on September 2025
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
"Ari promised us to complete our project (which included kitchen, guest bath, master bath, laundry room and deck) in 6 weeks. They were done early and we're very pleased with the results. The crew was here almost every day, working on the project. We had a major water issue that soaked the carpet in the master bedroom and Ari was quick to assure us they would replace the flooring in the bedroom. Any issues they encountered were taken care of with no additional cost over what we were quoted up front.
Cabinets and countertops are GORGEOUS! Very, very pleased with the custom pantry they had built for my kitchen!
Our only negative was the language issue as most of the crew didn't speak English. But we were able to communicate well enough to accomplish what was needed.
We would use Finecraft again if we do any further remodeling.
Pictures attached.
"
We specialize in both residential and commercial work. -Cutting, welding and assembling pipes, tubes, fittings, and fixtures. - We do Underground work -Install fittings and valves and much much more. We value your time so everything will be done according to your timeframe.
"The workers did great! they were in and out so fast."
Martha N on June 2024
We specialize in both residential and commercial work. -Cutting, welding and assembling pipes, tubes, fittings, and fixtures. - We do Underground work -Install fittings and valves and much much more. We value your time so everything will be done according to your timeframe.
"The workers did great! they were in and out so fast."
Roof work, interior and exterior painting, bathroom & kitchen remodeling, complete home remodels, tile work, electrical, plumbing, concrete & driveway work Have combined hands-on experience of over 20 years.
Roof work, interior and exterior painting, bathroom & kitchen remodeling, complete home remodels, tile work, electrical, plumbing, concrete & driveway work Have combined hands-on experience of over 20 years.
Dallas Docs Industrial Mechanic typically handles but are not limited to: -Installation of Machinery and Equipment: Dallas Docs installs new or used machinery and equipment in industrial plants. This involves aligning, leveling, and anchoring machinery. -Maintenance and Repair: Performing regular maintenance on machinery and equipment to ensure smooth operation. This includes lubricating parts, replacing worn components, and conducting routine checks. -Troubleshooting and Diagnostics: Identifying problems with machinery and determining the best way to repair them. This often involves reading blueprints, schematics, and using diagnostic tools. -Welding and Fabrication: Dallas Docs is highly proficient and skilled in welding and in fabricating new parts or repairing existing ones as part of maintenance and repair work. -Machine Overhauls: Conducting complete overhauls of machinery, which can include disassembling, inspecting, repairing, and reassembling large pieces of equipment. -Precision Measurement: Using precision measurement tools to ensure that machinery is installed and functioning correctly. -Adherence to Safety Protocols: Following strict safety protocols to ensure the safe operation of machinery and to prevent accidents in the workplace. -Working with a Variety of Machinery: Dallas Docs works with a wide range of machinery, including conveyors, pumps, turbines, and production machinery. -Emergency Repairs: Responding to emergency breakdowns and working under pressure to quickly repair machinery and minimize downtime. -Upgrading and Modernizing Equipment: Involvement in upgrading or modernizing old machinery and integrating new technology into existing systems.
"Extremely proficient, professional and knowledgeable on working on very complex machines. Very informative and i look forward to doing work with Christian and his son again."
Iven P on January 2024
Dallas Docs Industrial Mechanic typically handles but are not limited to: -Installation of Machinery and Equipment: Dallas Docs installs new or used machinery and equipment in industrial plants. This involves aligning, leveling, and anchoring machinery. -Maintenance and Repair: Performing regular maintenance on machinery and equipment to ensure smooth operation. This includes lubricating parts, replacing worn components, and conducting routine checks. -Troubleshooting and Diagnostics: Identifying problems with machinery and determining the best way to repair them. This often involves reading blueprints, schematics, and using diagnostic tools. -Welding and Fabrication: Dallas Docs is highly proficient and skilled in welding and in fabricating new parts or repairing existing ones as part of maintenance and repair work. -Machine Overhauls: Conducting complete overhauls of machinery, which can include disassembling, inspecting, repairing, and reassembling large pieces of equipment. -Precision Measurement: Using precision measurement tools to ensure that machinery is installed and functioning correctly. -Adherence to Safety Protocols: Following strict safety protocols to ensure the safe operation of machinery and to prevent accidents in the workplace. -Working with a Variety of Machinery: Dallas Docs works with a wide range of machinery, including conveyors, pumps, turbines, and production machinery. -Emergency Repairs: Responding to emergency breakdowns and working under pressure to quickly repair machinery and minimize downtime. -Upgrading and Modernizing Equipment: Involvement in upgrading or modernizing old machinery and integrating new technology into existing systems.
"Extremely proficient, professional and knowledgeable on working on very complex machines. Very informative and i look forward to doing work with Christian and his son again."
Five Star Bath Solutions of Dallas is a full-service bathroom remodeler specializing in bath and shower remodeling and installations. We offer leading solutions for bath and shower remodeling, including custom bath-wall systems, new bathtubs, or tub to shower conversion, walk-in bathtubs and much more. We provide quality bath and shower remodeling at an affordable price.
"Very good. They were very friendly and reliable. They did work well with us to allow us to install the tile that we had purchased."
Tish K on October 2024
Five Star Bath Solutions of Dallas is a full-service bathroom remodeler specializing in bath and shower remodeling and installations. We offer leading solutions for bath and shower remodeling, including custom bath-wall systems, new bathtubs, or tub to shower conversion, walk-in bathtubs and much more. We provide quality bath and shower remodeling at an affordable price.
"Very good. They were very friendly and reliable. They did work well with us to allow us to install the tile that we had purchased."
we.offer.remodeling.house.cleaning animal.sitting.elderly.care.including sitting with your loved one and making sure they are well taken care of cooking them three meals a day and making sure meds are provided and they can get to stay at home and do there normal activities and live a better life then being trapped in assisted living
we.offer.remodeling.house.cleaning animal.sitting.elderly.care.including sitting with your loved one and making sure they are well taken care of cooking them three meals a day and making sure meds are provided and they can get to stay at home and do there normal activities and live a better life then being trapped in assisted living
...
Showing 1-10 of 114
FAQs for sewer line repair projects in Frost, TX
The average cost to snake your main sewer line is around $250 for a simple snake. Most sewer line specialists charge between $45 and $200 per hour for main sewer line snaking, so the time involved plays a major role. The price you’ll pay will depend on the severity of the clog, the item causing the backup, how long it takes to remove the item, and more. A more severe issue that requires unclogging a main sewer line will cost $3,100 on average.
Yes, most states require plumbers to be licensed, and for good reason. Hiring an unlicensed plumber could lead to poor quality work, costly future expenses, and potential code violations.
As you browse our pro listings, take note of the “Angi Approved” badge. Angi Approved businesses meet our standards for certification which include:
The owner, principal, or relevant manager passed a criminal background check
Required to have applicable state and local licenses
Maintain an average star rating of 3.0 or better on our network, if they have at least one review
Paying to advertise their services
Meeting any other eligibility criteria required by Angi
Keep in mind licensing is different from certifications. A license is a legal requirement to operate a business, while certifications are voluntary.
You should not attempt to snake your sewer yourself. Accessing and snaking your sewer requires heavy-duty equipment, and while renting is possible, misusing it can damage your sewer main and leave you with very expensive repair costs, not to mention potential environmental issues and severe water damage. Accessing your sewer also exposes you to hazardous sewer gasses, and failing to seal the sewer properly after work can be very dangerous. It’s always best to hire a professional sewer cleaner near you to handle this type of work.
The average cost to unclog a drain is around $200, with prices ranging between $110 and $800, depending on the type of drain and the extent of the clog. Hiring a professional to snake the toilet or sink will usually cost between $110 and $275, a bathtub or shower typically costs around $225, and a main line clog can cost between $100 and $800 based on the severity of the clog and how far beyond the access point the clog sits. Since the labor involved varies, most plumbers will charge an hourly rate for drain cleaning.
The average cost to hire a plumber is around $100 an hour but can vary between $45 and $200 an hour depending on the plumber’s experience and the repair that you need. It’s also important to note that these prices can go up on holidays, and emergency plumber rates average $150 per hour, in addition to a flat-rate trip fee of $100 to $350.
The Frost, TX homeowners’ guide to sewer line repair services
From average costs to expert advice, get all the answers you need to get your job done.
When your shower or sink starts draining slowly or not at all, it’s time to act. Get tips for how to unclog a drain, and learn about drain cleaning service pricing.
Discover the average water tank cost, including installation, maintenance, and tips to save. Get transparent pricing and expert advice for your home project.
Find out the average water pressure regulator replacement cost, key price factors, and tips to save on your project. Get transparent, expert-backed cost info.