Get matched with top metal fabricators in Brookshire, TX
There are 5 highly-rated local metal fabricators.
Matching on Angi
Share some details about your home project.
Within moments, match with highly-rated local pros.
Compare quotes and choose the best pro for the job.
Recent Metal Fabrication Reviews in Brookshire
TEXAS FORGED METAL
Texas Forged Metals was responsive and did quality work. I needed my automatic gate repaired after not working for 2 years. After years of not working the gate had began rust and lean. They reset the gate to where it could shut again, fixed all my rust, and did a great job painting it. They replaced the motor and rerouted the power source from solar to a direct line my fuse box. I loved their work so much I brought them back to install an iron fence in my yard. The fence came out great! I highly recommend Texas Forged Metals
In August 2020, we completed a complicated replacement backyard 3-story deck project with the expert help of Architectural Fabricators. As background, we live in a 100-year old house in Montrose. The previous owner, built out the attic into a 3rd floor efficiency apartment, and constructed a 3-story deck that served as outdoor entry, fire escape, and seating area. It was done in treated pine and included a 1st story deck (12x28’), wrap-around 3-story staircase, and upper deck (10x12’). Unfortunately, after 25+ years, the wood deteriorated and the staircase became unsafe and unusable. We needed to replace the entire structure. After engineering plans were drawn and a city construction permit was secured, we started the project. The project required demolition of the existing structure, then construction of the new structure with drilled cement piers to support the four 8x8”x21’ metal columns for the 3rd story deck platform, metal I-beams for decking substructure, a 20’ metal spiral staircase, metal safety railings around all decks, and then wood decking and stair components. A consultant who we had worked with previously drew the engineering plans and secured the City of Houston permit. He was great. So, we started the project by contracting with a small deck-building company that had been recommended. With that company, we completed demolition of the old structure and got the piers drilled, pored, inspected and approved. However, our contracted deck building company could not finish the job. It did not have the capabilities to complete the remaining metal fabrication, construction and welding aspects. So, mid-project, we had to reset and find another company. We asked around, and were told to contact Architectural Fabricators because they had capabilities for completing the metal fabrication, installation, and wood-decking components. This recommendation turned out to be blessing. I contacted them through their website in January 2020 prior to the COVID-19 lockdown, and received a quick call back from David, the sales manager. We set up an in-home meeting, and he came over to review the project. He met with us for almost 2 hours while I explained the project, showed him the plans, status of the city permit, and work completed to date. He considered the project, said their company had the skills and capabilities to complete it, and that he would get back to me with a bid. Interestingly, I contacted 4 other companies for bids to help us out, and Architectural Fabricators was the only company that responded. David returned a bid that was complete and totally acceptable. In fact, he and company owner, Jason had brainstormed and suggested some very cool alterations to the plans. We immediately signed the contract and put a work schedule in play. Construction resumed in March 2020 with Architectural Fabricators, just as the COVID pandemic began to rage. However, this did not stop the work. We all practiced excellent pandemic safety precautions with masks and distance. This is a compliment to all the guys for their work ethic and safety manners. I want to give a shout out to all the workers. First acknowledgment is to crew foreman Luis and his metal workers Carlos, Ruben, Gustavo, and Julio who completed the installation of the large support columns and I-beams. They were competent, skillful, and careful with the positioning, leveling, and welding. Everything passed inspection without comment. Next is to Alejandro and his crew who built and installed the spiral staircase. Marco, one of his guys, expertly welded the staircase in placed and then installed the railings. They are all experienced welders and builders. And last but not least, kudos goes to Cesar and his crew Ramon and Ruben who installed the wood decking and metal planter box. Cesar is a master craftsman with wood. We chose IPE wood for its lasting qualities and beauty, and the guys did a great job of laying the decks. As an example of the care and pride they put into the deck, Cesar carefully custom cut rounded corners in the deck boards to fit the rounded corners of the large support columns. Everything is precise, flush, and square. The project was completed in August 2020. And it is beautiful. All city inspections of construction elements were approved and the final Certificate of Compliance was received. We could not have completed this replacement deck structure without Architectural Fabricators. Again, Jason and David were patient and accommodating during the pandemic and execution of the project. They were actively involved, cared about the project quality, practiced work site and pandemic safety measures, and didn’t ignore us. David called each week to ask how things were going and if there were any issues. He was a pleasure to work with, as was Jason. It’s nice when an owner is engaged with the work and progress. Finally, the project could not have turned out as well as it did without the dedication and masterful efforts of the crew. They were friendly, skillful, and conscientious. They showed up when scheduled. They cleaned up after each day’s work. These are the guys everybody wants to have work on their home projects. From our perspective, the investment we made in this home project with Architectural Fabricators was well worth it. Not only is this structure a showpiece, it has been built to last. We plan to enjoy the outdoors in our Montrose backyard on these lower and upper decks with family and friends for many years to come. Many thanks, Jim and Carrie Markell
It went extremely well. We researched firms on Angie’s List and contacted several. Architectural Fabricators was hands down the best in every aspect. David Lisner was our contact person. The response from the company was very fast and they provided a decent proposal. David was very accommodating to our additional requests to have very detailed specs for all steps of dismantling the old gate and installing the new gate. He continued to provide prompt follow up throughout the proposal process which took several weeks. Regarding the actual work, the team of workers was great. They worked hard the entire time. At times, there were 3-4 guys working at a time and they worked constantly. The project took two days and the workers left the area clean each day. Note that this company uses galvanized steel and sets the post 5 feet deep, and it may have been even 6 feet deep. (This is VERY important as we discovered that our previous post was only set 2 feet deep which is why we had so many problems with our old gate shifting and then not closing properly.) After installation they painted it and it looks beautiful. It opens and closes so smoothly and without a sound. Bottom line: We are very happy
My neighbor recommended Architectural Fabricators, who had built her automatic driveway gate. David Lisner came to my house to estimate the job. I requested two other bids but I felt most comfortable with David's approach and his professionalism. David was responsive to my requests to modify the scope of the job. The work was done promptly and efficiently. The gate looks great and works well. I am very pleased with the result. I would recommend this company
Excellent work and customer service. Crew was timely and completed all work on schedule. Crew maintained a clean work area and left work site tidy. Overall, fence is fantastic.
Contacted vendor after reading reviews on Angie's List. He came out on time and we had a good discussion. He followed up with a bid via e-mail as we had discussed. So far we have not done this project but are likely to do so in 2017 and there's a high probability we will use Architectural Fabricators
Great. Good communication. The repair was done quickly, at a fair price, with very little hassle on my part.
The service and quality was exceptional, and almost 3 months since installation we remain extremely satisfied. After discovering the company on Angies list and checking out their extensive web site, I contacted them and received and immedaite appointment for the following day. Jason came to my home, surveyed the front porch area and offered several suggested solutions and desgns. His crew turned up 2 days later, arriving on time,and spent the day installing the gates to our front porch. I was so impressed with the outcome, especially the service, that I ordered another similar gate for our side entrance. Once again, the gate was fabricated and installed a couple of days later. I found the owner, Jason, and the two seperate crews that performed the work to be very helpful, professional, and competitive to another firm I had previously contacted. I would highly recommend this company
Jason and Alejandro did a great job, would recommend them and plan to have the do my wrought iron fence which is rusting badly.
TEXAS FORGED METAL
The entire iron gate replacement process, from the estimate appointment; explanation of services; planned date of work; removal of old gate; and the installation of the new gate went very well. We are very pleased with the new and improved driveway gate. I was especially impressed that the same person who provided the estimate kept me updated with the installation plan and personally supervised the work crew to ensure that everything was done per spec.. Thank you Texas Forged Metal
Guardian Roof Systems, a Houston based roofing company, was founded on a simple principle, always go the extra mile to satisfy our customers. And that’s what we do with every roofing project we take on. Through the use of quality roofing materials, uncompromising attention to detail, competitive pricing, and some of the best warranties in the country, we work hard to ensure every customer is happy with our work. Backed by a team with more than 20 years of experience in the roofing industry, w..
"Since this was the first claim I have ever filed on my house Ryan took the time to walk me completely through the whole process. He gave me all the information I would need for my HOA application and once I received the okay Ryan immediately put me on their schedule. They were scheduled the following Monday and Tuesday. Everything went just as Ryan had told me it would. They covered my pool and plants and moved breakable items away from the house. I even had furniture delivered on Monday and the team made sure there was a clear path to the front door. All debris was removed and clean-up was as if they hadn't been there. I work odd hours and Ryan was great to work around my schedule. Thank you so much my new roof. I am so glad you came in my neighborhood that day. I love working with HONEST people.
Founded and based as a local rain gutter company in the year 2000, Gamez Construction, now offers many other residential and commercial construction services. We specialize in Roofing Repair & Replacement, Gutter Repair & Replacement, Exterior Remodeling, Siding, Interior & Exterior Painting, Masonry and Fencing. Gamez Construction is greatly skilled to achieve great customer satisfaction. Priority to finish projects on time with the best quality possible has place our reputation to the highe..
A & B Metals serves homeowners, builders, and management companies in the Houston and surrounding areas. We specialize in the design and fabrication of gates and fences, new gate operators, gate operator repairs, wrought iron repairs and maintenance. Owner, Tony Ackley, has over 20 years experience working with customers to meet their requirements
"Tony Ackley performed the repair quickly and for a good deal less than other contractors I called who wished to replace the fence. He was fast, extremely professional, and did the job beautifully. I would not hesitate to call him again. He has my highest recommendation."
We offer high quality professional Brass, Copper and Silver metal, polishing, refinishing, antique restoration, custom design, fabrication and installation services to residential and commercial clients. Honesty, reliability and dedication. Colonial Brass is very proud of the many projects, small and large, that we have taken part in completing over the past years. Custom designed and manufactured sanctuary gates, antique lighting restoration and conversion, and altarware refinishing are onl..
"I truly appreciated the front door hardware being turned around within the day so that my front door didn’t have to be unlocked all night. I have used them for 18 years and think they are professional and give good quality work. Front door hardware takes the brunt of the weather but their lacker helps keep in nice for a couple of years.
We specialize in Automatic driveway gates and wrought iron fence. We use galvanized steel for all of our projects, set our post 5' deep and use Light duty commercial grade gate operators. We believe we give you a higher quality product for your money. For every job we do CAD drawings that will be exactly what you will get. We also do wood fences, shade arbors, masonry fences, and masonry columns. We have been a member of the BBB since 2007 and have an A rating
We guarantee your satisfaction and we won’t leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! Check out our services offered and call or click to schedule a free estimate today!
"No problems, excellent Customer Service. Verified during entire process to assure everything went as agreed."
Done Deal Iron Works offers you the best quality and price on wrought iron, galvanized, powder coated fences, gates and breezeways. We provide you with all the access control needs for your property. We are open to new projects and existing projects. With Done Deal Iron Works, we are here to help you every step of the way and work hard to ensure all of your wants and needs are met! Safety Doesn’t Have to Mean Unsightly Our experienced staff is committed to creating a safe and beautiful enviro..
"did excellent work. There was some mess up on the scheduled work days, not entirely the fault of DDIW."
We have offices in Dallas and our Headquarters in Conroe Texas with many Insulation delivery and install trucks and also a dozen roofing Sales and damage inspection teams with Storm Damage insurance claim adjusters on staff to help you with any storm damage claims you have. We use the same claim damage estimating software as ALL the Insurance companies for quick claim approvals
Classic Copper Works uses time honored German copper smith techniques handed down from father to son and passed on to our highly skilled artisans. We specialize in the fabrication of custom copper & bronze products and other metal specialties. WE DO NOT OFFER REPAIR SERVICES OF ANY KIND. Additional phone number - (888) 908-5339
"The first unit was delivered in a timely manner. However, the carrier did not adhere to the shippers warnings about product fragility and the unit was received in a damaged state. The unit was sent back to Classic Copperworks for repair. The repair was treated as a priority by Mr. Threadgill, who had the unit shipped back to me in three weeks. It arrived in good condition that time.
<br /> Mr Threadgill was very helpful in providing support in order to finish our project. He even had a caulking product sent to us in order to help with flashing the unit. That meant alot.
<br /> I am not a professional contractor, but was able to install the unit myself with his support. However, my profession does provide me the opportunity to serve the public and as such, I feel that I am more than qualified in commenting on good service. While Classic Copperworks may not be the cheapest provider of goods and services, they stand behind their product and provide great support. It requiress a "leap of faith" to order an expensive unit from an out-of-state provider with no prior mutual history, but I can attest to my complete satisfaction.
<br /> WRS
Maribel's Fence Co. Establish in 2006 in Rosenberg Texas . We are a family owened and operated fence company building fence that's last for years , we build all types of fence Wood , chain link , wrought iron , vinyl , dog kennels , automatic gates , gate openers , intercom systems all types of access controls give us a call for your free no obligation estimat
Rate Angi’s Metal restoration services in Brookshire
Metal restoration services in Brookshire are rated 4.3 out of 5 based on 634 reviews of the 8 featured Brookshire pros
The Angi rating for Metal restoration services in Brookshire is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal restoration services needs. Angi’s review system takes into account ratings on price, quality, timeliness, responsiveness and feedback for Angi Certified Pros.