Get matched with top roofers in Pleasant View, TN

You should definitely be wary of roofing contractors who offer significantly lower prices than their competitors. Most roofers in the area are all dealing with the same cost of materials, and labor costs are often comparable, too. If they’re significantly cheaper than other companies around, it could be a scam. Read reviews and ask other roofing companies and contractors if they’ve heard of the suspected scamming company.

A properly installed, high-quality tarp can be left on a roof for up to 90 days. However, this is only a temporary measure and not a substitute for proper roof repair or replacement. Thinner tarps or those exposed to heavy wind and rain may not last the full 90 days, so it's important to monitor the tarp's condition to ensure it continues to protect your roof from the elements.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

While two-layer torch down roofs are easier to install than three-layer roofing, it is best not to DIY the installation. Torch down roofs require expert knowledge of the application process to get it right the first time and prevent leaks or poor craftsmanship, not to mention that roof work can be dangerous.