Get matched with top roofers in Cross Plains, TN

Roof raking can damage shingles if improperly done. Be sure to use a rake that’s designed specifically for removing snow from a roof, and don’t use excessive pressure. Light, consistent pressure to pull down the bulk of the snow is all that’s needed—if you clear right down to the shingles, you’re probably using too much force and risking roof damage.

While two-layer torch down roofs are easier to install than three-layer roofing, it is best not to DIY the installation. Torch down roofs require expert knowledge of the application process to get it right the first time and prevent leaks or poor craftsmanship, not to mention that roof work can be dangerous.

During the framing process, builders connect the roof to the walls with materials, including metal connectors, plywood panels, and wood blocks. These roof-to-wall connections are important and provide weatherproofing, noise and temperature insulation, protection against pests, and home integrity. The type of connector and method used will vary, depending on your home’s construction and needs, and each has pros and cons in terms of cost, noise insulation, longevity, and reliability. Talk with your home or roofing contractor about the best connectors for your roof and walls, and what they recommend for your home.

Metal roofs do not inherently leak more than shingle roofs; when properly installed, they are generally less likely to leak. Asphalt shingle roofs are more susceptible to leaks due to factors like wind uplift, damage from extreme weather, moss growth, and ice dams. Over time, asphalt shingles also lose their protective grit, which reduces their waterproofing capabilities. In contrast, metal is a more resilient material that stands up better to heavy precipitation and high winds. However, metal roofs can develop leaks if they are poorly installed, have improperly sealed fasteners, or experience issues from thermal expansion. For this reason, professional installation and regular maintenance are crucial to ensure a metal roof's longevity and superior protection against leaks.