Top-rated driveway sealcoating pros.

Best driveway sealcoating pros near Highmore, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your driveway sealcoating project in Highmore, SD?

Select your specific project to find the pro for you.

Top-Rated Driveway sealcoating pros in Highmore - Updated Nov 2026

No results for Driveway sealcoating pro in

Try adjusting your search criteria.
Driveway Sealcoating FAQs, answered by experts

You should contact your driveway installer before winterizing a newly installed driveway. Winterizing it before the asphalt or concrete has fully cured can damage the driveway. But in many cases, you don't need to winterize a newly installed driveway anyway since it's likely freshly sealed and won't have much damage yet. 

In general, water-based driveway sealers are considered the most eco-friendly option. Products that utilize water, limestone, and some basic binding agents have lower VOC levels and odor levels compared to sealants made with oil or tar. In recent years, soy-based driveway sealers have become available for homeowners who want fully VOC-free driveway sealers.

The three most common types of asphalt are hot asphalt, MC cold mix, and UPM asphalt. Hot asphalt is used most often for paving and patching roadways while it’s hot and workable. MC cold mix asphalt cures more slowly than hot asphalt, but it can be used for temporary patches and repairs in low-traffic areas. UPM is also used cold, but it can be used as a longer-term fix, usable in almost any conditions at almost any temperature.

New asphalt goes through two stages: drying and curing. Drying typically takes 24 to 72 hours, after which the surface is solid enough for light use like walking or careful driving. While you may be able to park on it after 72 hours, the surface is still soft and should be treated gently. Full curing is a much longer process, taking anywhere from 30 days to a full year for the asphalt to reach maximum strength. During this extended curing period, the asphalt is susceptible to damage from heavy vehicles, sharp objects, and high temperatures. Factors like weather, the specific asphalt mix, and application thickness all influence drying and curing times. For the most accurate timeline and to ensure the longevity of your new asphalt, it is always best to consult with your installation contractor for their specific recommendations.

When comparing installation costs, asphalt is often less expensive upfront than concrete. Asphalt prices typically range from $7 to $15 per square foot, while concrete can range from $3 to $18 per square foot. However, long-term costs should also be considered. Concrete driveways generally last longer (up to twice as long) and require less maintenance, which can make them more affordable over their lifespan. While asphalt has a lower installation cost and is easier to repair, it requires more frequent maintenance, such as sealing, which can add up over time. Therefore, while concrete is more expensive initially, its durability may offset the cost in the long run.

The Highmore, SD homeowners’ guide to driveway sealcoating

From average costs to expert advice, get all the answers you need to get your job done.