Get matched with top insulation pros in Swansea, SC

According to a report from Energy.gov, radiant barrier installations can save between 5% and 10% on your energy bill each month that your HVAC cooling is in operation. That fact can mean savings of up to more than $325 per year for homes that experience frequent direct sunlight and high summer temperatures. 

Yes, proper insulation in your attic or ceiling can help prevent ice dams. When attic spaces are too warm, they cause the snow on the roof over those areas to melt more quickly than the rest of the roof and then travel downward to a colder section of the roof where they refreeze. If less heat is allowed to escape from underneath the roof, snow will melt at a more consistent rate, making ice dams less likely.

It is possible to insulate your walls without removing drywall, but it’s not a good idea to attempt the work yourself. A professional can use blown-in insulation or spray foam insulation to fill wall voids without opening up the walls, and the option they use typically depends on your climate and whether or not there’s insulation in your wall already that can remain in place. Spray foam insulation costs more and isn’t always a viable option, but it’s a better insulator. Call in an expert to help decide which is right for you.

On average, insulating an attic costs about $2,500, with a typical range of $1,500 to $3,500. The final price often depends on the attic's size, with costs generally falling between $1 to $3 per square foot. For example, insulating a 1,800-square-foot attic would likely cost between $1,800 and $5,400.

If the project involves removing old insulation, this can add an average of $900 to the total cost, bringing a full removal and reinsulation project to around $3,000.

Several factors influence the overall cost:

• Insulation Type: Prices per square foot vary significantly by material.

• Reflective: $0.50–$1.50

• Blown-in: $1–$4

• Batt: $2–$4

• Loose-fill: $2–$5

• Spray foam: $2–$5

• Structural insulated panels (SIPs): $4–$7

• Project Complexity: Factors like sealing air leaks, poor attic accessibility, and required inspections can add to the cost.

• Removal Issues: The discovery of mold, asbestos, or pests during the removal of old insulation can substantially increase the price.