Get matched with top roofers in Little River, SC

You can technically install a metal roof over asphalt shingles, but it isn’t a good idea. This is because you’re essentially creating a moisture barrier under the metal, which can easily—and often does—lead to significant mold damage. Removing an asphalt roof isn’t terribly expensive, and some roofing companies might cut you a serious labor and disposal discount if you add it to a new install.

Here are a few tips on how to choose a roofer:

• Get everything in writing

• Ask for insurance, license, and bond, then verify them

• Check their reviews 

• Ask for recommendations

• Get multiple quotes

You’ll also want to watch out for any red flags like:

• Pushy sales tactics

• Not willing to show necessary documentation

• Bad gut instincts

Yes, installing a new metal or tin roof can increase your home's value. A metal roof's longevity and durability are major selling points for prospective buyers, as it means they likely won't have to worry about a roof replacement. These roofs can last 40 to 80 years, which is significantly longer than traditional asphalt roofs.

In terms of return on investment (ROI), homeowners may see an increase in home value of around $7,000 to $8,000, which can represent 60% to 70% of the installation cost. Another way to measure ROI is per square foot, which can range from $3.00 to $8.40, with higher returns in areas where a durable roof is particularly beneficial.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.