Get matched with top roofers in Wilderville, OR

Metal roofs have a reputation for being noisy, but with proper installation and adequate insulation, they are not significantly noisier than shingle roofs. The type of metal used can affect the sound level; for instance, steel roofs are typically noisier than slate or asphalt tiles but quieter than aluminum. While some people find the sound of rain on a metal roof pleasant, you can take steps to reduce the noise. Installing a thicker underlayment, adding insulation between the roof and the house, or using acoustic tiles can effectively muffle the sound. The gauge (thickness) of the metal roofing can also contribute to sound dampening.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

You should definitely be wary of roofing contractors who offer significantly lower prices than their competitors. Most roofers in the area are all dealing with the same cost of materials, and labor costs are often comparable, too. If they’re significantly cheaper than other companies around, it could be a scam. Read reviews and ask other roofing companies and contractors if they’ve heard of the suspected scamming company.

In some cases, yes, you can put a second roof layer over architectural shingles, but it depends on your home’s structural stability and the local building codes where you live. Architectural shingles are thicker and heavier than standard asphalt shingles, so you may need structural reinforcement or a structural engineer’s inspection before proceeding. Additionally, some building departments don’t allow for two roof layers, regardless of the roof type. You should ask a professional if ripping the old roof off before installing the new one is the best option for you.