Get matched with top drywall pros in Cove, OR

The two most common types of drywall are ½-inch and ⅝-inch thick white or gray drywall. Most walls are ⅝-inch thick because the drywall is slightly more resistant to damage and it helps dampen sound considerably. It’s also much heavier, which is why most ceilings are ½-inch thick. There are special use cases where you want to use ⅝-inch thick drywall for ceilings, such as between a garage and living space, and the ceiling above a finished basement.

It depends on the specifics of your project. If you’re using a stud to secure your object to the drywall, you won’t need the extra support of drywall anchors. But if there aren’t any studs in the area where you plan to hang the object, you should use drywall anchors.

Drywall mud should be left to dry for at least 24 hours before sanding, though drying time depends on the thickness of the application, humidity, and room temperature. Thicker layers or projects done in high humidity may require 48 hours or more of drying time. You’ll know the mud is ready when it feels completely dry and appears light in color throughout. Sanding too early can cause smudging or gouges, so patience is key for a smooth, professional-looking finish.

Metal corners, often referred to as corner beads for square corners, are used on drywall installations to provide structural reinforcement to vulnerable outside corners. Their usage safeguards against chipping, denting, or other forms of damage, enhancing the overall durability of the wall. Metal corners also offer a precise and straight edge that facilitates sharp and clean lines, crucial for achieving a polished and professional finish.