Best plumbers near Wilson, OK

Most of the time, homeowners are responsible for replacing a main water shut-off valve. This is because the property owner also owns the water service line from the shut-off valve near their property line to their house. That means they must maintain, repair, or replace it when needed.

That pesky faucet leak can have a few different causes, most of which are standard wear and tear that occurs over time, but that doesn’t make it any less annoying, especially when the energy bill hits:

• Old washer: A deteriorated washer or gasket is the most common cause of a leak. Luckily, it’s easy and affordable to fix.

• Old packing nut: There’s a chance the packing nut (located beneath the handle) is loose and simply needs tightening, or it has been worn down, stripped, and needs to be replaced.

• Freezing temperatures: The water sitting in your spigot over winter can freeze, expand, and lead to damage and leaks.

• High water pressure: High water pressure is hard on pipes over time and can cause cracks and leaks, too.

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.

Yes, shower water goes into the septic tank. Shower water is a type of greywater, and in fact, all water used in a home with a septic system—including water from sinks, toilets, the dishwasher, and the washing machine—drains into the tank. When shower water enters the tank, debris like soap and hair travels with it. The solid debris sinks to the bottom to become sludge, while soap residue joins the scum layer at the top. The remaining water is treated in the tank before moving to the drain field for further treatment and dispersal. It is important to avoid putting oil or harsh chemicals down any drain, as they can cause clogs or disrupt the beneficial bacteria required for proper wastewater management in the septic system.