Best roofers near Granville, OH

The common formula for measuring a roof is length x width equals square footage. Professional roofers measure the length and width of your roof, including dormers, and determine its pitch and rafter sizes. If a roof surface is a triangle, they’ll divide that square footage by two, then add up the square footage of each surface to get the total for the roof.

While there are many benefits to installing a metal roof on your home, there are some downsides, too. Zinc roofs, in particular, are susceptible to corrosion from overly salty air directly near coastal areas. Another potential downside of zinc roofing is that it must be allowed to expand and contract with the weather. This means special attention is necessary to how it's fastened to the home to avoid issues. 

Whether a metal or shingle roof is better for you depends on your preferences. Standing seam metal roofs require little to no maintenance, but if you install a screw-down metal roof where the fasteners are exposed, the gaskets on the fasteners will dry rot and need to be replaced. Generally, screw-down metal roofs need to be re-screwed every 15 to 20 years.

Metal roofs are energy-efficient and have extended warranties, while asphalt shingles are less durable than most. They tend to lose color and get damaged over time, and absorb heat from the sun.

Yes, a roof blister can cause a leak if it gets to the point where it pops. Prior to popping, a roof blister is just an aesthetic issue, but once it pops, you’re left with a small hole in the shingle. Water from rain and snow can easily get inside this hole and interact with your underlayment, roof decking, and the building material below.