Get matched with top fire pit installation pros in Galena, OH

Wiring a light switch wrong can cause a fire if the incorrect wiring causes arcing, meaning the current jumps uncontrolled from one conductor to another. Loose wires or worn wires that are not repaired or replaced can cause arcing. If you’re not 100% sure you can do the job safely, don’t attempt to wire a light switch on your own.

You should never block both the top and bottom of your chimney. Proper airflow is essential because the temperature inside the chimney will still fluctuate as your house warms and cools. Moisture can build up without ventilation, leading to dampness in your walls over time. Blocking the top prevents debris and animals from entering, but the chimney still needs air circulation to avoid condensation issues. Allowing the chimney to breathe maintains the health of your home and prevents long-term damage.

There are a few things you can look out for to ensure your chimney is safe to use. Check for the following issues:

• Cracks or missing pieces in the masonry of the chimney

• Creosote buildup in the chimney, which is a black, tar-like substance

• Cracks, stains, or scorch marks in the firebox

• Water stains in or around the fireplace

• A broken or stuck damper

While your municipality may have its own regulations requiring pergolas or other structures to be a certain height above a fire pit, the standard recommendation is that the pergola should be at least 10 feet above the fire pit. A taller pergola allows the heat from the flames to dissipate before reaching the structure.