Get matched with top boiler installation pros in Clinton, OH

"Really well. We needed a half split system as we have a 100 + year old house with a boiler and required air conditioning for health reasons. We didn’t want to have to deal with window air conditioners or removing the boiler system to replace with a forced air system; the half split was the best choice. Sal’s had the most reasonable bid and was very prompt in scheduling and installing. Every person we dealt with from Sal’s was professional, kind and had wonderful senses of humor. Grade A+ all around."

"After a Brandon repairman checked out the boiler, he determined a new valve was needed. It was ordered and installed within 2 days."

Quality Heating & Cooling is a heating, cooling and indoor air quality company providing HVAC maintenance, service and installation to residential and commercial customers in Stark County and surrounding areas. Quality is proud to be a local, veteran-owned, family business. Since our family opened the doors in 1985, we have focused on the quality of our workmanship. We challenge each of our employees to have the same dedication to their craft and to conduct themselves with the highest level of integrity. We are very confident in the level of quality that we provide as our name indicates. Because of this confidence, we are able to offer an exclusive two-year test drive with a 100% money back satisfaction guarantee on our heating and cooling equipment installations. We are proud to be a top 10 Trane Dealer in our region. Learn more about Quality Heating & Cooling by visiting the website at: www.qualityheatingandcooling.com.

My name is Thomas Litto, and I am the owner of Litto Home Renovations. I have hands-on experience in a wide range of home repairs and renovation work, including replacing flooring, handling electrical and plumbing projects, and much more, as well as performing demolition for remodels and renovations. I take pride in providing reliable, high-quality workmanship and helping homeowners improve and transform their spaces with careful attention to detail.

"Yes did fantastic job on install and cleanup"

"I called Mark on a Tuesday about my old furnace which was acting up. He came over THAT AFTERNOON and with the information he gave me, I decided that it was time to replace it. On Thursday of that week I came home from work and the new unit was installed! Mark and his crew are professional, clean and knowledgeable. I have great peace of mind knowing that they did the work and that I paid a fair price."

"I was looking for quotes for a new furnace since mine was over 20 years old and failed, so decided to have it replaced along with the matched central air conditioner unit. I got estimates from several heating and cooling companies but ultimately gave the job to RTT Heating and Cooling, LLC . Ryan came out quickly, looked at my units and answered all my questions to give me the best options for both cost and reliability for a new complete system. Ryan was very knowledgeable, courteous, and professional. He didn’t try to sell me stuff I didn’t need like others. His office contacted me and we scheduled a date to replace the units. Ryan sent out Tommy and Tyler , these guys removed the old Furnace and Air unit and Professionally installed the new ones, They were quick, professional, courteous and answered all questions. I couldn’t of asked for a better team of people including the office personal Nicolina, who was all so very professional and prompt. All I can say If you’re looking for a GREAT heating and cooling company to work on or replace your furnace and/or air, then Give Ryan a call! I highly recommend him, OH! and his pricing was fantastic and offered great quality equipment ! Thank You all at, RTT Heating and Cooling ! John"

"It went great.  The young man came in and went right to work.  I bought the house a year prior and apparently this has not been done on this heating system probably since it was installed.  The technician showed me before he started and after and it has been running much better.
"

"This is a mixed review.  The whole thing is kind of long winded so, I'll give you the bottom line
first, and if you're interested, you can read the gory details second.
Bottom Line
The price for the repairs was too high for my budget and I didn't use their service. However, the initial diagnostic survey at $79 (less the $30 Angies List Coupon) Was worth every cent.
Gory Details
Repairman #1 arrived toward then end of the time window I was given.  A nice young man, very conscientiously put on paper shoe covers so as to not track in dirt.  I explained the problem:  I have an old hot water-baseboard heating system.  The original boiler (circa 1960's).  The house has an addition and the previous owners had added three zone valves.  A fourth "zone" had no zone valve and was on all the time.  Our situation was that we had scorching heat in a small section of the house, and none in the rest.
Repairman #1 discovered that two of the zone valves were stuck closed and couldn't find the third.  There were things about the installation that puzzled Repairman #1 and he admitted that he doesn't evaluate boiler systems too much, most folks have forced air.  He made arrangements to have Repairman #2 come out the next business day, who was an expert on hot water heat, and there would no additional charge.  Of course, I agreed.
Repairman #2 came out at the prescribed time.  Again, another very nice, cordial person, a little older and he was well briefed from Repairman #1 - but he was still interested in listening to what I had to throw into the mix.  My impression of him was VERY positive.  He was confident in his work, knew what he was looking for and explained everything he was doing along the way.  He spent a lot of time figuring out where each pipe was going, which were supply and which were returns.  He quickly confirmed that the two zone valves were stuck closed and then with a very cool camera on a flexible wire that he stuck up above a section of finished ceiling, he found the missing zone valve (which was also stuck closed - but he managed to open it manually!)
He went to his truck to make a call and work up a repair price.  About ten minutes later he came back in and sat down to explain his findings.  He said that the house is really kind of small for a zoned system (1,600 sq feet ranch) and that he thought we should simply remove all the zone valves and replace them with copper pipe to match the system.  He said it would be best to add a few bleeder valves to make the refill process more efficient now and in the future.  He couldn't offer a solid price because of all the variables, like two of the valves are up in the rafters - very tight space to work in and soldering so close to the wood rafters is a fire hazard.  But, he did say it would probably take the better part of a day at $175 per hour plus materials.
I did the math in my head and my jaw hit the floor.  He was estimating $1,400 in labor and I guessed a couple hundred more in marked up material.  I was ready to spend $500 - $600 to get the job done, but maybe $1,600 was out of the question.
I've repaired copper pipe myself, I was aware of the fire hazard thing he was talking about.  But, I figured I wasn't the first one to face that problem, and they must have some kind of a fix for that. From my previous experience, I knew that sweating / soldering copper pipe still wet from just being filled with water is a suckers game.  I was NEVER able to get a solid seal on wet pipe.  The pipe had to be bone dry - period.  I thought I could do this repair myself, but it would take a long time to let the opened pipes dry out.  We're in early November and leaving the heat off long enough to dry the pipes, was out of the question.
Sadly, I was thinking that we would have to limp through a hot / cold house through the winter and I would do the repair next spring / summer.
I thanked Repairman #2 for his time and expertise and told him that I couldn't afford the repair.  He offered to install a new boiler along with the repairs for $4,500 - a real "deal" on a new boiler and full repair.  Of course the new price wasn't much of a tease when I couldn't afford the repair that cost about one third less.  I again thanked him and we parted cordially.  The whole evaluation cost $49 after using a $30 coupon found here on Angie's List.
But here is the final chapter!  The next day I mentioned all of this to a friend at work. He suggested I look into using SharkBite connections.  The Sharkbite connectors simply push on - no soldering!  They connect to copper, PVC and PEX flexible tubing.  "If you can use Lego blocks, you can use Sharkbite connectors", he said.
I did look into it and the demonstration videos online looked too good to be true.  Fast, easy, approved by code, solid no leak connections, and they say you can seperate connections easily with a special tool.
I bought the connectors at a local big box store.  I cut the first old valve out with another cool tool I found made to work in tight spaces. I put the special connectors easily and slipped in a new piece of copper in between.  I'm not exaggerating when I say that this process took about 15 minutes.  It took longer to drain and refill the boiler!
I was going to do the second valve at the same time, but discovered I needed a slightly different kind of fitting.  No big deal, let's test out what I did so far.  I refilled the system, bled out the air, fired up the boiler and Sha-zamm!  The connection was rock solid!
I spent $49 for the evaluation, $15 for the connectors, used some copper pipe I already had from a previous project, and about three hours time.  (draining, refilling and bleeding took the lions share of that time.)  And, we have heat!  Well, we have more heat.  I need to get the other connector thing and do it again for the remaining stuck valve.
While Weatherking was too expensive to perform the work, I can't complain about the expert evaluation.  Hence, the mixed review.


"

"Had Jim come out to give me an estimate and hid did a very thorough job.  Called him a few months later to have the insulation and ventilation needs addressed.  Jim and his crew were very professional, trust worthy and they did a great job with the installation.  Jim walked me through the work when they were finished and the price ended up being less than what he originally quoted me.  I can not say enough about Jim and the company.  It is very hard to find great companies who show up on time, are professional and deliver a great product, so I always like to praise the companies that do,  Jim and his crew were all of the above, professional and provided great customer service.  I would highly recommend North Coast Insulation and Ventilation, you will not be disappointed.  Thanks for the great work and a warm house.
"