Get matched with top backsplash installation pros in Lewiston, NY

No, when done correctly, removing the tile shouldn’t damage the subfloor. However, if there was pre-existing damage to the subfloor from standard use or lack of maintenance, the subfloor may need repairs. For example, if the contractors notice mold growth on the subfloor or an uneven surface, you may need more extensive services before installing new tile.

If you DIY tile removal, remove the tiles one step at a time, individually removing the tile, grout, and mortar to prevent unnecessarily damaging the subfloor. Depending on the age of your home, consider having a professional inspect the subfloor to ensure it’s in good enough condition to lay new tile.

Yes, even if you’re being careful, removing tile can damage your drywall to some degree. However, you can minimize the damage done to it by eliminating a majority of the grout and taking your time prying each tile off. Also, it's worth noting that you might have more drywall damages to deal with if your tile is set into the mortar.

Yes, unfortunately, it is normal for wall and floor tiles to crack, especially when you drop heavy items on tiled floors or place heavy objects on them. Tiles are also more susceptible to cracking when ceramic tiles designed for walls are installed on floors, as these are often not strong enough to handle heavy loads from foot traffic and furniture. Similarly, tiles that are installed incorrectly, lack adequate subflooring, or have other installation problems are prone to cracking. To avoid these problems and the inevitable repair and replacement costs they bring, always hire a professional for tile work and follow best practices for installation.

Yes, you can install a backsplash directly onto drywall, provided the wall is properly prepped, clean, and dry. For best results, especially in kitchen areas, your walls should be made of moisture-resistant drywall, often called green board. If your current wall isn't moisture-resistant, it's recommended to replace it before installing the backsplash. For even greater protection against water damage, you can remove the existing drywall and install a tile backer board or cement board instead. While properly installed standard drywall is typically strong enough to support a backsplash, some local building codes may require water-resistant materials in kitchen areas, so it's a good idea to check.