Top-rated floor polishers.

Get matched with top floor polishers in Lancaster, NY

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Lancaster, NY?

Select your specific project to find the pro for you.

Find Floor polishers in Lancaster

Avatar for Zekes Roofing & Home Services
Zekes Roofing & Home Services
4.2(
17
)
Clean & Polish Flooring - For Business

Serving Lancaster, NY and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"these youngsters were polite and wasted no time. Repairs to the outside door base, kitchen wall and ceiling and the bathroom wall plastering and painting turned out great. the price was right. I will bring them back in the spring for two more projects. Joe R Depew N.Y."
Metal
Metal over wood and shingles
Metal over shingles
Tear off
Tear off

+11

Response time6 days
Recommended by70%of homeowners
Showing 1-10 of 41
Floor Polishers questions, answered by experts

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

Using too much soap or floor cleaner can leave your laminate floors looking dirty or cloudy after mopping. Only use a teaspoon of soap or cleaning solution in a gallon of water. Additionally, always be sure to sweep or vacuum laminate floors before mopping to ensure you pick up dried grit, hair, and dust that can be harder to catch with a wet mop.

If you have waxed floors or floors with a penetrating stain or oil, you can shine them up with some more wax and a cloth or floor buffer. After cleaning the floor thoroughly, apply wax to the floor in small sections and use a clean, dry cloth or towel to buff it until it shines. You can also use an electric polisher, which is especially handy for large floors.

Cleaning floors is a relatively easy DIY job, but paying for a professional cleaning service is worthwhile if you don’t have the time to dedicate to cleaning or if you have particularly dirty floors, deep-set stains, or wooden floors that you might damage during the cleaning process. A professional house cleaner will have the tools and experience necessary to remove dirt, pet hair, debris, and even stains and discoloration from your floors without damaging them. The service is also relatively affordable, making it a great investment if you don’t have the time or tools to do it yourself.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

The Lancaster, NY homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.