Get matched with top fireplace pros in Cross River, NY

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.

When your fireplace is not in use for longer periods of time, such as over the summer, you can keep smells at bay by spraying either a commercial fireplace deodorizing product or a blend of one part distilled white vinegar to one part water around the walls of the fireplace. 

Or, you can place a container of charcoal inside the fireplace to absorb odors. Just be sure to remove it before it’s time to start using the fireplace again.

Yes, it can be worth installing a gas fireplace, depending on your home heating needs. The cost to install a gas fireplace can be much lower than the cost to install a comparable wood-burning fireplace. The convenience of starting a fire with the flip of a switch and turning it off just as quickly makes a gas fireplace a big time saver over starting and maintaining a wood-fueled fire. A gas fireplace also does not require ash cleanup or frequent chimney cleaning to remove creosote and other buildup that can lead to chimney fires. Gas fireplaces burn and heat much more cleanly than wood fireplaces.

You can safely build a fire pit on your patio as long as you use porous, fire-resistant pavers or a fire pit mat over existing pavers. Otherwise, you’ll need to have exposed ground beneath your pit. You’ll also need to make sure the location for the fire pit is far enough away from your house and any other nearby structures.