"the insulation they recommended saved me about 5000kw a year. the amount of money i am saving is far more the insulation payment on my Eversource bill. No money cost to me out of pocket and my electric bill dropped quite a bit. best move i ever did."
"They did a great job of blowing the insulation in my attic. They were efficient and courteous of our needs very happy with the work performed. I would highly recommend it. I will be calling them to insulate my walls this spring."
"Stu and his team did an excellent job. They were very professional and quickly, efficiently and cleanly put new blown insulation on the attic floor of my old house. He also explained clearly how the insulation works, the R values and benefits. Thank you Discount Insulation."
"My experience with everyone was excellent. It started with an energy assessment followed up with spray foam insulation throughout my home. Good customer service and follow-up. All was explained thoroughly throughout the process and they welcomed my questions. I highly recommend this service."
"I contacted Fausto from Tigasi Insulation to discuss a project in my basement. He arrived on time, and from the beginning, I could tell that he was a professional who takes pride in his work. At the end of the job, Fausto personally asked me to inspect the work that had been completed. I was very impressed with the quality of his work and the excellent job he did. I highly recommend Fausto and Tigasi Insulation to anyone looking for professional and reliable service. Thank you, Fausto, for the great work!"
"The Royal Comfort team (Simon, Jose, Miguel, and Spencer) did an excellent job insulating a huge exterior wall as well as the attic of my house. They were an excellent crew—very professional, flexible, and thorough throughout the entire 6-day project. For the attic, they completely removed all the wood that was covering the space, along with all the old insulation material that had been sitting up there for over 50 years. I was also incredibly impressed by their cleanliness; every single day, they left the inside of my house perfectly clean. On top of that, they perfectly cleaned all the different areas outside my house that they used to cut wood and work. I highly recommend them!"
"Joe and his team were extremely knowledgeable - he thoughtfully explained our options and walked me through the benefits of each. Would recommend Koala for your insulation needs."
"I'm a General Contractor (Jon Beer Contracting is my company) and recently worked with Corey and his team from Prestige Energy Solutions. We are doing a combination of a gut renovation and a new build on my own personal home that had a lot of tricky details and moving parts. From start to finish his team was professional, attentive, clean and skilled. I wouldn't hesitate to hire him for our future insulation needs."
"They removed old moldy insulation, sprayed fungicide on the mold and encapsulated a crawl space. Also insulated with foam insulation around the entire basement rim joist, including the crawl space. They were on time and finished before they expected to. During the inspection, when I pointed out bubbles in the foam, they redid that section without question. Zy called after they finished to make sure I was satisfied."
"The consultation went great. Cary came out and spent about an hour measuring and evaluating our basement. He left me with a quote the same day as well as my options. Although a little pricey we decided to go for it. The guys came out a few weeks later to insulate and were here all day. No issues there. However, the basement has not warmed up since and we spent quite a bit of money and were told it would be about 60-65° down there. It only increased by maybe 5° and still isn’t even close to 60/65°. I emailed the guy Cary who came out and was told he’d talk to his guys about it. No response. I had to follow up. Then he said he’d send someone out. Never got a call or anything to schedule it. Again I had to reach out. Weeks later he finally said he’d come out on 3/18/21 at noon. It’s now almost 1pm and he’s still not here. Their service was great when they wanted our money but now that we have paid, it seems we are not longer a priority and they don’t care to come fix whatever the problem may be. Very disappointing. We spent thousands of dollars and our basement still feels very cold!"
Yes, you can hammer a nail into a wall stud. But before you do, it’s important to confirm that you’re actually nailing into a stud—and not wiring, pipes, or ductwork. To check, find a few more studs in the wall, then measure to make sure they’re either 16 or 24 inches apart.
The best way to make long, straight cuts is to use a utility knife and a T-square to score the sheet, snap along the score, and then finish the cut by cutting through the paper on the opposite side with the utility knife. If you’re making small cuts, curved cuts, or cutouts for electrical boxes or light fixtures, you can use a manual jab saw to keep costs down, but an electric spiral saw or oscillating multi-tool will get the cleanest, fastest cuts possible.
Applying plaster to a wall will usually cost between $2 and $10per square foot for both the material and labor. The cost will vary based on the quality of the plaster you’re using and whether or not prep work is required before the work begins. Wall prep can add up to about 10% to your total costs. Plastering exterior walls can be more expensive in many cases because they are taller and require scaffolding and safety equipment.
Popular wall textures include orange peel, knockdown, spray sand, and smooth finishes. Orange peel and knockdown are particularly common choices for drywall as they are simple and cost-effective. Orange peel texture has a lightly bumpy surface resembling the skin of an orange, while knockdown (sometimes called knockout) looks like a stucco finish with flattened high spots. In contrast, popcorn texture has fallen out of fashion, partly due to its past association with asbestos and a shift toward more restrained interior design styles.
You can skim coat plaster, but it’s better to repair the plaster itself. A skim coat is a thin coat of drywall joint compound spread over the surface of a wall. The result is a flat finish that looks pleasing, but part of the appeal of plaster is its imperfections and aesthetic. Skim coating is best when limited to drywall applications.
The Armonk, NY homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
New insulation makes your home more comfortable and boosts energy efficiency. Use this guide to budget for insulation installation costs in New York, NY.
The cost of blown-in insulation in New York, NY varies depending on the type of insulation, labor, prep work, and more. Learn more about the cost factors in this guide.
Insulating your attic can improve your home’s efficiency and reduce electric bills. Use this guide to find out what attic insulation will cost you in New York, NY.
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.
Insulating your walls requires the right insulation and installation method. Keep reading to learn how to insulate a wall without removing the drywall.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
