Get matched with top fireplace pros in Caliente, NV

There are several ways to determine if your chimney or fireplace damper is open or closed. A simple method is to check for airflow by placing your hand near the fireplace opening; if you feel a draft or hear wind whistling, the damper is open. An open damper might also make the room feel cooler, similar to the outdoor temperature, or cause your HVAC system to work harder than usual. For a more definitive test, you can try a visual inspection, although it may be difficult to see. Alternatively, you can light a small piece of paper and observe the smoke; if it is drawn up the chimney, the damper is open. Always use the damper handle to adjust its position.

A chimney requires both a cover and a cap, but these parts often get confused with one another. A chimney cover seals the top of the chimney around the flue pipe to prevent water from entering the chimney. A chimney cap is a piece that sits above the flue to prevent animals, debris, and water from entering the flue.

In some cases, you can use a fireplace once the insert has been removed. However, before burning a fire, you must have a professional inspect it and the chimney to make sure they're functioning properly and no damage has occurred from removing the insert. That’s because using a fireplace without an insert could create fire hazards due to issues with airflow and heat dispersion, depending on the fireplace design and material. A professional can advise on whether you should make certain repairs or modifications before using your fireplace as an open hearth.

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.