Get matched with top concrete repair specialists in Tyrone, NM

Whether you need a permit for foundation repair depends on your location and the scope of the work. Major repairs like foundation stabilization typically require a building permit, while smaller projects such as sealing non-structural cracks or applying waterproofing solutions often do not. It's crucial that your contractor follows all local building codes, as an inspector will review the work to ensure it's up to standard. Failing to obtain the necessary permits can create issues when selling your home and may lead to further damage if the work is not done correctly. Your foundation repair specialist will usually know if a permit is needed and can handle the process for you. You can also contact your local building department or municipal office to confirm the requirements and verify that your contractor has filed the appropriate paperwork.

In most cases, it is safe to live in a home with minor foundation problems, but you should not let the issues persist. Virtually all foundations have small cracks from normal settlement, which are not a structural concern but should be sealed to prevent water intrusion. However, major damage—such as large structural cracks, sinking foundations, or bulging walls—can make a home unsafe. Other issues that can pose safety and health risks include poor indoor air quality from mold or pests, uneven floors, and rotten beams or joists. It is always best to have a foundation repair expert or structural engineer inspect any issues to determine if your home is safe to live in.

Most of the time, normal foundation settling will present as thin cracks in the foundation and minor creaks in the floorboards. In contrast, you can identify foundation issues by wide or uneven foundation cracks, horizontal or step-shaped gaps on the foundation wall, or cracks that go around corners of your foundation. Foundation problems can also cause changes in your living area, like increased humidity, uneven or sloping floors, nail pops in drywall, countertops pulling away from the wall, and windows and doors getting stuck. When in doubt, call in a professional to identify the underlying cause.

If your concrete steps have crumbled or chipped, you can fix them by removing any chips or flakes, cleaning and wetting the affected area, applying a concrete bonding agent, and finally applying new concrete, usually in the form of Portland cement. For widespread damage, you can consider concrete resurfacing instead. For fixing concrete spalling that has led to deep damage, you might need to remove damaged material, add structural supports, and pour new concrete into a mold.