Get matched with top concrete resurfacing pros in Truth Or Consequences, NM

The method used to repair cracks in your concrete driveway will depend on the extent of the damage, but the most common method for small cracks is to use a driveway resurfacing compound. This solution is either cementitious or made of polyurethane, and it will seal the crack and make your driveway appear undamaged. 

For more severe cracks, you will likely need to hire a professional driveway repair service. They can use mudjacking, epoxy injections, partial driveway replacements, or a combination of these to fix more serious cracks in your concrete driveway and to prevent recurring issues.

Stamped concrete overlays last about 25 years when properly installed and cared for. Installing an overlay on top of structurally sound concrete helps ensure it reaches its full lifespan. A local stamped concrete pro should finish and seal the concrete upon installation, and you should reseal the overlay every three to five years. Stamped concrete overlays are durable, long-lasting, and a beautiful way to refresh a space.

Yes, you can mudjack cracked concrete, but the cracks will need to be repaired once the concrete has been leveled. If the concrete is severely cracked in multiple places, replacement may be a better option, but for less severe cracking, mudjacking is a good solution as long as cracks are correctly caulked and sealed.

Concrete resurfacing and concrete overlay are terms often used interchangeably to describe the process of applying a new, thin layer of pre-blended concrete over an existing slab. This process enhances the durability and appearance of the concrete, giving it a fresh look without the high cost of a full replacement. The new layer is typically between 1/4-inch and 1-inch thick, significantly less than the 4 inches required for a new slab, and can be stamped, colored, or textured for a custom finish.

While the terms are often considered the same, their meaning can sometimes vary by contractor. Some may use "overlay" to describe a thicker application that adds structural integrity, while "resurfacing" might refer to a thinner layer intended for cosmetic upgrades. Other common names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.