Get matched with top concrete repair specialists in Red River, NM

It’s usually not a big deal if your foundation sinks between 2 and 3 inches into the ground after construction, provided the settlement occurs evenly. This is usually indicative of normal settlement that occurs as the soil under your home adapts to the weight of the structure. If the home sinks more into the ground or the settlement occurs unevenly, leaving portions of your home to sink further down than others, then call a foundation repair specialist to address the issue and avoid additional damage.

Most single-story homes don't have foundations strong enough to support a second story, but they can be reinforced for an addition. A structural engineer can assess your foundation and what needs to be done to get it ready. They'll look at any cracks or unevenness in your current foundation and consider any special framing or beams your home needs, especially if it’s in a high-wind or hurricane area.

“To support a second story, many structural engineers will require that you install additional concrete piers in the crawlspace,” says Tschudi. “This involves hand excavating, pouring a large concrete footing—usually with specially coated rebar—and then building concrete piers right up to the girders.”

Yes, you can fix a block foundation. It’s important to address the issue immediately and have a foundation repair professional understand the severity of the issue and determine the best course of action. If the wall collapses before the foundation is repaired, then you’ll have to reassess your entire foundation.

The average cost to repair a concrete driveway ranges from approximately $830 to $2,800, with a typical project costing around $1,765. The price varies widely depending on the type and extent of the damage. Minor crack repairs can be as low as $0.10 to $0.15 per linear foot and may be a DIY project. More significant repairs are priced per square foot: replacing a damaged slab costs about $6 to $14, while raising or leveling sunken concrete costs $3 to $25. Resurfacing is another option, costing around $3 to $5 per square foot. Factors influencing the total price include the size of the affected area, whether reinforcement is needed, and labor costs.