"DC LLC/Chris McDaniel did an outstanding job for NNMC's El Rito Campus. They pulled electricity to our greenhouse and installed irrigation systems at both the greenhouse and our rain gardens. From start to finish, their work was top-notch ? knowledgeable, professional, and thorough.
What really set them apart was how well they worked with our facilities team and how they kept communication open throughout the entire project. Chris genuinely cares about the quality of his work and it shows. They were helpful, responsive, and a pleasure to work with.
Highly recommend DC LLC for anyone looking for a reliable, skilled contractor. We couldn't have asked for a better experience."
"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
At Twin Rivers Electric, we deliver reliable, high-quality electrical solutions for both homeowners and businesses across Albuquerque and surrounding areas. Built on experience, integrity, and attention to detail, our mission is simple—do the job right the first time and stand behind our work.\n\nWe specialize in a full range of electrical services, including residential and commercial service work, panel upgrades, new construction wiring, troubleshooting, and advanced energy solutions like solar and battery backup systems. Whether it’s a small repair or a large-scale project, we approach every job with the same level of professionalism and precision.
Garrett Goff, owner of Goff Electric, LLC, has dedicated himself to setting the standard for residential electrical services. With two decades of hands-on experience, he approaches every project with technical rigor and professional integrity, believing that quality work is the only standard worth providing, ensuring that every home he services is powered safely and efficiently for the long term.
Smart light switches are designed to be compatible with most lights and traditional home wiring, but there are several key factors to check. First, verify your home's wiring, as some smart switches require a neutral wire to operate, which may not be present in older houses (often built before 1985). Always check the wiring requirements for the specific model you choose. Second, consider your light bulbs; while smart switches work with almost any light, using a dimming feature requires dimmable bulbs, such as dimmable LEDs. Finally, ensure you have the necessary network connection. Most smart switches need a Wi-Fi connection for remote control, but some older models might use other standards like ZigBee, which would require a compatible hub.
A home electrical inspection usually takes one to two hours. Full home inspections fall on the longer side, while code compliance inspections that focus on a single repair or installation may only take a few minutes. Optional add-ons like infrared inspections can add time, but these aren’t usually included in your standard inspection.
If your microwave is on the fritz and you suspect the fuse has blown, you can check it to confirm it’s the source of the problem. Start by disassembling the panel and carefully checking the fuse filament or ceramic components. If your microwave uses a glass fuse, you’ll likely see discoloration and a melted filament. If your microwave contains a ceramic fuse, you’ll need to use a multimeter continuity tester to check if there’s continuity.
Yes. Even when it’s not in use, an outlet is still connected to wiring, and if the wiring is faulty or wet, a fire can occur. Broken outlets can also cause fires, for the same reasons; in fact, most broken outlets are broken due to damaged or worn-out wiring. It’s worth replacing outlets that are old or damaged with the help of an electrician.
Yes, you can connect two extra outlets (or more) to one outlet if the total load on the circuit allows for it. If you have a 15-amp circuit, electrical code allows up to eight outlets or light switches. But if you’re dealing with outlets in the kitchen and bathroom, you may not be able to have as many. Kitchen and bathroom appliances often need higher amperage. You can also change a single outlet to a double outlet by cutting a larger hole in the drywall and replacing the outlet with a quad receptacle.
The Crownpoint, NM homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Whether you’re shopping for a new home or simply doing a safety check on your current place, learn what factors influence an electrical inspection cost.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
