Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Oldmans Township, NJ

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Oldmans Township, NJ?

Select your specific project to find the pro for you.

Find Metal fabricators and restorers in Oldmans Township

Avatar for Liberi Fence Inc

Liberi Fence Inc

5.00(
57
)

Liberi Fence Inc

5.00(
57
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Liberi Fence, LLC is owned and operated by two partners. We offer professional fence installation & "Do it yourself" fence kits delivered to your home. Easy to install and "FREE" delivery (200 mile radius) within 48 hours on our quickship items.

"Exceptional Service & Unmatched Quality! Liberi Fence Company went above and beyond my expectations! From the initial consultation to the final installation, their professionalism, craftsmanship, and attention to detail were truly outstanding. The team was highly knowledgeable, guiding me in selecting the perfect fence for my property, and the entire process was seamless. They arrived on time, worked efficiently, and ensured my yard was spotless before they left. I highly recommend Liberi Fence Company for anyone seeking top-quality fencing and exceptional service!"

Ryan V on February 2025

Liberi Fence, LLC is owned and operated by two partners. We offer professional fence installation & "Do it yourself" fence kits delivered to your home. Easy to install and "FREE" delivery (200 mile radius) within 48 hours on our quickship items.

"Exceptional Service & Unmatched Quality! Liberi Fence Company went above and beyond my expectations! From the initial consultation to the final installation, their professionalism, craftsmanship, and attention to detail were truly outstanding. The team was highly knowledgeable, guiding me in selecting the perfect fence for my property, and the entire process was seamless. They arrived on time, worked efficiently, and ensured my yard was spotless before they left. I highly recommend Liberi Fence Company for anyone seeking top-quality fencing and exceptional service!"

Ryan V on February 2025


Avatar for Steelway Cellar Doors

Steelway Cellar Doors

4.82(
55
)

Steelway Cellar Doors

4.82(
55
)
Customers say: Quality work
Recommended by 94% of Angi customers
Recommended by 94% of HomeAdvisor customers

Steelway Cellar Doors does not cut corners on anything we do. We manufacture everything we install and we do it all with our own employees and never use subcontractors. This means you can be assured that we do the job right and if you want something unique that we have the ability to do the job. We only do basement entrances - we don't finish basements, do waterproofing or decks or additions. Excavating next to your home and opening up your foundation wall is a big deal that's why we insist on gettting permits so you can be assured that the job is done right. We have specialized equipment to do the job with the minimal amount of interuption to your home - engineered headers, special saws to reduce dust and yard mats to protect your yard. All part of the benefit of using a company that specializes in one thing.

"After a terrible experience with Egress Systems Inc. not showing up on contracted date I contacted Steelway to see if they could get my egress installed before my basement reno started in a week. Tate came out to see the space early the next morning to accommodate me since I was leaving for vacation that morning. He even gave me his cell phone #. They gave me a fair price and were able to squeeze the job in before construction started. Everything was smooth and easy. They were prompt, provided excellent customer service, and we are very pleased with the job. I highly recommend Steelway for egress window install."

Alyssa K on July 2024

Steelway Cellar Doors does not cut corners on anything we do. We manufacture everything we install and we do it all with our own employees and never use subcontractors. This means you can be assured that we do the job right and if you want something unique that we have the ability to do the job. We only do basement entrances - we don't finish basements, do waterproofing or decks or additions. Excavating next to your home and opening up your foundation wall is a big deal that's why we insist on gettting permits so you can be assured that the job is done right. We have specialized equipment to do the job with the minimal amount of interuption to your home - engineered headers, special saws to reduce dust and yard mats to protect your yard. All part of the benefit of using a company that specializes in one thing.

"After a terrible experience with Egress Systems Inc. not showing up on contracted date I contacted Steelway to see if they could get my egress installed before my basement reno started in a week. Tate came out to see the space early the next morning to accommodate me since I was leaving for vacation that morning. He even gave me his cell phone #. They gave me a fair price and were able to squeeze the job in before construction started. Everything was smooth and easy. They were prompt, provided excellent customer service, and we are very pleased with the job. I highly recommend Steelway for egress window install."

Alyssa K on July 2024



Avatar for Fisher Precious Metals

Fisher Precious Metals

5.00(
14
)

Fisher Precious Metals

5.00(
14
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Uncompromising quality and integrity in all of your precious metals purchases and sales. Specializing in gold & silver bullion. Avoid gold and silver retailers selling you their inventory at high premiums! We pay top prices for jewelry, sterling, diamonds and watches! Fisher Precious Metals is a national gold and silver dealer. Listed as a national dealer with the United States Mint, Fisher Precious Metals is a trusted resource for gold and silver coins and bars. Established in 1995, the firm works with individuals on all issues related to buying and selling physical precious metals, storage, security, estate liquidation and long-term exit strategies. John Fisher, the President, is an ICTA Board Member and is approved by the State of Florida to teach Continuing Education courses on precious metals investing to CFP's, CPA's, attorneys and insurance professionals. In addition, John is a frequent guest on various financial radio broadcast programs. Fisher Precious Metals is an A+ rated Accredited Business with the Better Business Bureau.

"It went great! We found Fisher Precious Metals on Angie's List, and after googling them, we found they had very positive reviews across the web. Although it was a 45 minute drive from our home, we felt it might be worth it, and it was. We made an appointment with John via email, arrived at 11:00, and spent just over an hour in his office. He evaluated the sterling silver set we had to sell and gave us what we felt was a very fair price. He'd given us an estimate on the value of the gold coins via email, and although the price of gold had fluctuated since he'd provided the quote, the final price was very, very close to the initial quote. We were happy to learn that they will also buy jewelry, as I have a few pieces I haven't worn in a very long time. We were very pleased with the entire experience and will definitely return to their company when we have gold or silver to sell, and we're happy to recommend them to our friends. One thing to keep in mind is that sterling silver sets are basically worth the price of the silver itself. We knew that going in, so we were not disappointed and, in fact, the price we received was a little higher than we'd expected."

Laura C on February 2018

Uncompromising quality and integrity in all of your precious metals purchases and sales. Specializing in gold & silver bullion. Avoid gold and silver retailers selling you their inventory at high premiums! We pay top prices for jewelry, sterling, diamonds and watches! Fisher Precious Metals is a national gold and silver dealer. Listed as a national dealer with the United States Mint, Fisher Precious Metals is a trusted resource for gold and silver coins and bars. Established in 1995, the firm works with individuals on all issues related to buying and selling physical precious metals, storage, security, estate liquidation and long-term exit strategies. John Fisher, the President, is an ICTA Board Member and is approved by the State of Florida to teach Continuing Education courses on precious metals investing to CFP's, CPA's, attorneys and insurance professionals. In addition, John is a frequent guest on various financial radio broadcast programs. Fisher Precious Metals is an A+ rated Accredited Business with the Better Business Bureau.

"It went great! We found Fisher Precious Metals on Angie's List, and after googling them, we found they had very positive reviews across the web. Although it was a 45 minute drive from our home, we felt it might be worth it, and it was. We made an appointment with John via email, arrived at 11:00, and spent just over an hour in his office. He evaluated the sterling silver set we had to sell and gave us what we felt was a very fair price. He'd given us an estimate on the value of the gold coins via email, and although the price of gold had fluctuated since he'd provided the quote, the final price was very, very close to the initial quote. We were happy to learn that they will also buy jewelry, as I have a few pieces I haven't worn in a very long time. We were very pleased with the entire experience and will definitely return to their company when we have gold or silver to sell, and we're happy to recommend them to our friends. One thing to keep in mind is that sterling silver sets are basically worth the price of the silver itself. We knew that going in, so we were not disappointed and, in fact, the price we received was a little higher than we'd expected."

Laura C on February 2018


"We hired Standard Fence to replace an existing chain link with a 4ft wood privacy fence. Quoted as a two day job. At the end of day one the old fence is down and about 60% of the new fence is installed, at 6ft height. Wife and I discussed and decided we were okay with not having them redo the completed work and adjusted to 6ft final product. I should have insisted on it being redone as this was the first of multiple cut corners. I did however raise concerns about the old chain link fence posts that were removed as there was still a fair amount of metal protruding from the ground. I was told they would grind them down to the concrete and fill back dirt. Not ideal but I gather this is the new industry standard instead of full removal... fine, if completed as stated. Day 2 work completed after no more than 3 hours, I return later that evening (after spouse paid...) to find that only one of the posts was actually ground down to the concrete as that concrete was slightly above dirt level to begin with. 4 others, included one perfectly in the middle of the primary gate, are now semi-sharp metal at no better than dirt level with the rest being higher. A tuft of grass was laid on top of the metal in the gate opening to hide it from sight. Contractor contacted by email and replied "I only could grind down so far. The dirt was binding up the grinder." No further explanation of why it wasn't possible to dig said dirt out of the way and complete the job as stated. No real attempt was made to clean up afterwards. I collected two sizable piles of scrap metal and post caps in the span of a 10 minute walk around my yard and my neighbors. This was also mentioned to the contractor with the response "I am sorry about the few fittings left around. I genuinely didn't see them." This is simply put a bold faced lie considering some of the post caps were tossed under a shed where they could not have just fallen on their own and being the size of a tennis ball are essentially impossible to miss in a brief walkaround. 6 weeks after installation the hits keep coming as the hardware used for the main gate was insufficient, or poorly installed, and the gate is already sagging with some of the screws used beginning to come lose and others having cracked the wood with how close to the edge they were installed. A second smaller gate is also sagging such that opening and latching both are a hassle. Each will require me to either install completely new hardware or make adjustments to keep them in working order before the season is out. I could continue with more details about nail points in the gate that were brought to the contractors attention not having been ground down and other hardware issues such as not even bothering to install any sort of handles or pulls. If you need a brand new fence, I believe they are capable of doing a nice job. I however didn't get such service and would advise a watchful eye throughout the job and a close inspection prior to remitting final payment. If you need a fence replaced make sure you know what their full intentions for removal are an again inspect on 'completion.'"

Mark W on July 2022

We install chain link, wood, pvc fencing. 20 years exp, licensed and insured, custom wrought iron for steps, windows, porch columns, and patios. free estimates ask for Joe

"We hired Standard Fence to replace an existing chain link with a 4ft wood privacy fence. Quoted as a two day job. At the end of day one the old fence is down and about 60% of the new fence is installed, at 6ft height. Wife and I discussed and decided we were okay with not having them redo the completed work and adjusted to 6ft final product. I should have insisted on it being redone as this was the first of multiple cut corners. I did however raise concerns about the old chain link fence posts that were removed as there was still a fair amount of metal protruding from the ground. I was told they would grind them down to the concrete and fill back dirt. Not ideal but I gather this is the new industry standard instead of full removal... fine, if completed as stated. Day 2 work completed after no more than 3 hours, I return later that evening (after spouse paid...) to find that only one of the posts was actually ground down to the concrete as that concrete was slightly above dirt level to begin with. 4 others, included one perfectly in the middle of the primary gate, are now semi-sharp metal at no better than dirt level with the rest being higher. A tuft of grass was laid on top of the metal in the gate opening to hide it from sight. Contractor contacted by email and replied "I only could grind down so far. The dirt was binding up the grinder." No further explanation of why it wasn't possible to dig said dirt out of the way and complete the job as stated. No real attempt was made to clean up afterwards. I collected two sizable piles of scrap metal and post caps in the span of a 10 minute walk around my yard and my neighbors. This was also mentioned to the contractor with the response "I am sorry about the few fittings left around. I genuinely didn't see them." This is simply put a bold faced lie considering some of the post caps were tossed under a shed where they could not have just fallen on their own and being the size of a tennis ball are essentially impossible to miss in a brief walkaround. 6 weeks after installation the hits keep coming as the hardware used for the main gate was insufficient, or poorly installed, and the gate is already sagging with some of the screws used beginning to come lose and others having cracked the wood with how close to the edge they were installed. A second smaller gate is also sagging such that opening and latching both are a hassle. Each will require me to either install completely new hardware or make adjustments to keep them in working order before the season is out. I could continue with more details about nail points in the gate that were brought to the contractors attention not having been ground down and other hardware issues such as not even bothering to install any sort of handles or pulls. If you need a brand new fence, I believe they are capable of doing a nice job. I however didn't get such service and would advise a watchful eye throughout the job and a close inspection prior to remitting final payment. If you need a fence replaced make sure you know what their full intentions for removal are an again inspect on 'completion.'"

Mark W on July 2022



Automotive Repair and Maintenance, We do it all! Inspections, Brakes, Tires, Oil changes, exhaust, Tune ups.


LITTLE'S GARAGE

4.81(
16
)

LITTLE'S GARAGE

4.81(
16
)
Customers say: Quick response
Recommended by 93% of Angi customers
Recommended by 93% of HomeAdvisor customers

Little's Garage is a family owned business that is dedicated to making your life easy when it comes to the maintenance and repairs to your automobiles. We have been in business for over 45 years and pride ourselves on giving you the best value for your hard earned dollars. We are committed to providing our customers with the highest quality auto repair at an affordable price using quality parts. From brake repairs and oil changes to complete engine overhaul, trust us to get the job done on time and at a fair price.

"Exceeded my expectations. First time I ever called auto repair shop to thank them! I sent them a 2006 car close to ready for the scrap heap and they gave me back a car that runs and sounds like new!"

William L on April 2021

Little's Garage is a family owned business that is dedicated to making your life easy when it comes to the maintenance and repairs to your automobiles. We have been in business for over 45 years and pride ourselves on giving you the best value for your hard earned dollars. We are committed to providing our customers with the highest quality auto repair at an affordable price using quality parts. From brake repairs and oil changes to complete engine overhaul, trust us to get the job done on time and at a fair price.

"Exceeded my expectations. First time I ever called auto repair shop to thank them! I sent them a 2006 car close to ready for the scrap heap and they gave me back a car that runs and sounds like new!"

William L on April 2021


At Midvale Avenue Automotive we service cars, trucks, classic cars and motorcycles. Call us for any car problems or maintenance!


"I have worked with these guys several times before and they always do a good job. They repaired a bunch on my front porch and replaced the entire side stair railing. Looks great!"

Robert C on July 2018

Family owned & operated for over 30 years serving the delaware valley pa and new castle county delaware

"I have worked with these guys several times before and they always do a good job. They repaired a bunch on my front porch and replaced the entire side stair railing. Looks great!"

Robert C on July 2018

...
Showing 1-10 of 184
Metal Fabrication and Restoration questions, answered by experts

The best tool for cutting metal ducts depends on the duct's shape and thickness. For round ducts, a duct cutter provides accurate, clean cuts. Reciprocating saws equipped with metal-cutting blades are versatile and suitable for both round and rectangular ducts. They offer speed and precision, especially for thicker metal. 

Tin snips are handy for intricate cuts or smaller ducts. However, an angle grinder with a metal-cutting wheel is powerful and efficient for large or thick metal ducts. 

Yes, many fabricators provide welding, assembly, and on-site installation to ensure structural stability.

Some states require welders to be licensed and certified, while others don’t. However, it’s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they’re less likely to make a mistake that could be detrimental to your home. Use Angi’s state licensing tool to determine whether your potential hire has a welding license.

Most projects take 1-4 weeks, depending on material sourcing, design intricacy, and required finishing treatments like powder coating or galvanization.

Pet-resistant, vinyl-coated polyester is one of the strongest window screen materials available, with some manufacturers touting a 7x increase in strength compared to standard fiberglass screens. Stainless steel security screens are also extremely strong, but they’re not suitable for coastal areas due to the risk of corrosion from salty sea air. If sea air isn’t a concern, stainless steel is extremely tough.

The Oldmans Township, NJ homeowners’ guide to metal fabrication and restoration services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"