Get matched with top roofers in Seabrook, NH

The short answer is, yes, cedar shakes do last longer than asphalt shingles. But the long answer is, it depends on maintenance. Asphalt shingles last about 20 years, while cedar shingles typically last about 30 years with proper maintenance. If they are very well maintained and installed in an area with a mild, drier climate, they can last up to 50 years.

Fall is widely considered the best time of year to replace a roof. The moderate temperatures are ideal for roofing crews to work and for new shingles to seal properly. Additionally, autumn weather is often drier, reducing the risk of weather-related delays compared to the rainier spring season.

While spring is also a viable option, the higher chance of rainfall can slow down the project. The main drawback to a fall installation is that it's the peak season for roofers, which can lead to higher prices and scheduling challenges.

To potentially save money, you could consider scheduling your roof replacement during the summer or winter off-seasons. However, both seasons have significant disadvantages. Extreme summer heat can make shingles too soft to handle, while winter's cold, snow, and ice can create dangerous working conditions and prevent shingles from sealing correctly, as they typically require temperatures above 40-45°F.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

If you need to replace the roof over your attached garage, a roofing contractor can perform what is called a partial roof replacement that only affects garage roofing. However, it's important to keep in mind that only replacing a portion of your roof creates a situation where your roofing has two different lifespans. You will also miss out on the opportunity for a full roof warranty. In some cases, having two different roofs on your home could increase risks for leaks. When replacing the roof on a detached garage, homeowners have the option to make the project bigger by upgrading their home roof alongside their garage roof. However, this isn't necessary if your home has a newer, properly functioning roof. It is better to try to match the new garage roof to your home's existing roof instead.