Get matched with top gutter cleaning pros in Seabrook, NH

Gutters should be cleaned at least twice a year, in the spring and in the fall, to remove the debris from trees that can clog the eavestroughs and downspouts. Debris like leaves, twigs, and seed pods can build up and cause your gutters to overflow, potentially causing damage to your roof and foundation. Water backing up under the shingles can rot the edge of your roofline. Overflow water falling next to your foundation can end up leaking into your basement or crawl space.

The best times of year to clean your gutters are typically in the spring and fall. Cleaning in the fall is crucial for removing leaves and debris that have accumulated, which helps prevent clogs. A spring cleaning ensures your gutters are clear and prepared for seasonal rainfall.

As a general guideline, experts recommend cleaning your gutters at least twice a year. However, the optimal frequency depends on several factors, such as local weather patterns, the type of gutters you have, and the number of trees on your property. If your home is surrounded by many large trees or pine trees, you may need to clean your gutters as often as every three to four months. If you have few or no trees nearby, twice a year is likely sufficient. In some cases, you may need to clean them a couple of times during the fall and spring to keep them clear and allow water to flow freely.

Yes, it is generally considered safe to use a leaf blower to clear debris from gutters as long as you are wearing safety goggles and gloves. It's also necessary to have a gutter extension tool. In cases of severe clogs, it's necessary to manually clear debris that cannot be removed by the pressure of the leaf blower. Homeowners should be aware that the incredible power and speed of the output of a leaf blower can blow debris into downspouts. When this happens, water won't be able to flow through the gutters properly. For this reason, many homeowners hire professional gutter cleaners.

Yes, you can use a pressure washer to effectively clean debris, dirt, and grime from your gutters, but it must be done with caution to avoid damage. Always use a low-pressure setting, with a recommended range between 1,200 and 1,800 PSI. Excessive pressure can bend or dent aluminum gutters, damage seams, peel paint, or even knock shingles off your roof, potentially leading to leaks and moisture issues. For a safer alternative, consider soft washing or cleaning them by hand. When using a pressure washer, it is safer to use gutter elbow extensions from the ground rather than climbing a ladder, as the force can cause instability. Due to the risks, you may want to hire a licensed and insured contractor for the job.