Midcoast Aerus is an air & water filtration company with locations in Portland, Brunswick and Rockland, Maine. We offer high end water filtration products specific to your unique water quality situation. We offer free immediate response water tests which will allow us to make recommendations to fix your water quality. More complex treatment solutions will have a full certified lab analysis followed up with the correct solution.
"Installed system. Great communication and service."
Kathleen M on July 2022
Midcoast Aerus is an air & water filtration company with locations in Portland, Brunswick and Rockland, Maine. We offer high end water filtration products specific to your unique water quality situation. We offer free immediate response water tests which will allow us to make recommendations to fix your water quality. More complex treatment solutions will have a full certified lab analysis followed up with the correct solution.
"Installed system. Great communication and service."
Kathleen M on July 2022
Live Your Most Comfortable Life with a Company You Trust. We offer Same Day Service and Next Day Installation! Sila has been the center of delighting homeowners since 1989, with our team of engineers, certified technicians, and system designers that are proud to deliver the highest level of expertise in the HVAC industry. Whether it’s a repair, replacement, installation, or service, we have an unwavering commitment to keeping you and your family comfortable and safe — season after season. We guarantee satisfaction and are proud to have earned over 7,000 “A” ratings on Angie’s List and its prestigious Super Service Award!
"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."
steven m on November 2020
Live Your Most Comfortable Life with a Company You Trust. We offer Same Day Service and Next Day Installation! Sila has been the center of delighting homeowners since 1989, with our team of engineers, certified technicians, and system designers that are proud to deliver the highest level of expertise in the HVAC industry. Whether it’s a repair, replacement, installation, or service, we have an unwavering commitment to keeping you and your family comfortable and safe — season after season. We guarantee satisfaction and are proud to have earned over 7,000 “A” ratings on Angie’s List and its prestigious Super Service Award!
"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."
steven m on November 2020
SUPER SERVICE AWARD 2023, 2022, 2021, 2020, 2019,2018,2017,2016, 2015, 2014 AND 2013 PLUMBING. Hot & Cold Plumbing & Heating LLC is a full service plumbing, heating and gas-fitting company. For an immediate response to all your plumbing and heating needs, CALL (978) 701-1617.
"Bathroom plumbing went well. Eric is very knowledgeable and is very detailed with his excellent plumbing work!"
Dave D on March 2025
SUPER SERVICE AWARD 2023, 2022, 2021, 2020, 2019,2018,2017,2016, 2015, 2014 AND 2013 PLUMBING. Hot & Cold Plumbing & Heating LLC is a full service plumbing, heating and gas-fitting company. For an immediate response to all your plumbing and heating needs, CALL (978) 701-1617.
"Bathroom plumbing went well. Eric is very knowledgeable and is very detailed with his excellent plumbing work!"
Dave D on March 2025
Heritage Home Service is a premier home service provider operating in New Hampshire, Massachusetts and Maine – bringing all the perks that come with having a large team while maintaining a strong focus on family-oriented service.
"Ryan Boulanger was quite professional and comfortable to work with as he did the annual maintenance review of my Alpine burner. He explained the work he needed to do and what he did with knowledge and understanding and helped me to understand. Thanks for your work, Ryan."
David H on May 2023
Heritage Home Service is a premier home service provider operating in New Hampshire, Massachusetts and Maine – bringing all the perks that come with having a large team while maintaining a strong focus on family-oriented service.
"Ryan Boulanger was quite professional and comfortable to work with as he did the annual maintenance review of my Alpine burner. He explained the work he needed to do and what he did with knowledge and understanding and helped me to understand. Thanks for your work, Ryan."
David H on May 2023
Granite State Sewer & Drain Cleaning Co is your go-to plumbing and drain cleaning expert in New Hampshire. With our extensive experience and top-notch service, we stand out from the competition. Contact us today for all your plumbing needs! Additional DBAs - Granite State Sewer Pumps, Granite State Sewer & Drain Cleaning Inc.
"Granite State Sewer called me the next morning and had a technician out within two hours. He explained everything he did and was courteous and knowledgeable. The price was very fair, and I would use them again and will recommend to others."
Chali D on June 2020
Granite State Sewer & Drain Cleaning Co is your go-to plumbing and drain cleaning expert in New Hampshire. With our extensive experience and top-notch service, we stand out from the competition. Contact us today for all your plumbing needs! Additional DBAs - Granite State Sewer Pumps, Granite State Sewer & Drain Cleaning Inc.
"Granite State Sewer called me the next morning and had a technician out within two hours. He explained everything he did and was courteous and knowledgeable. The price was very fair, and I would use them again and will recommend to others."
Chali D on June 2020
Coy Plumbing and Heating delivers top-quality services with a focus on precision and reliability. From repairs and installations to emergency fixes, we ensure your systems will run smoothly and efficiently. ***WE ALSO SPECIALIZE IN BOILER REPAIRS AND INSTALLATION***
"We were very pleased with the communication and the outcome of our project. We have an old home with some older piping. Finding someone that works on steam boilers is tough. When they looked at the install, they explained what needed to happen clearly deand unrstandable."
Vinnie H on November 2024
Coy Plumbing and Heating delivers top-quality services with a focus on precision and reliability. From repairs and installations to emergency fixes, we ensure your systems will run smoothly and efficiently. ***WE ALSO SPECIALIZE IN BOILER REPAIRS AND INSTALLATION***
"We were very pleased with the communication and the outcome of our project. We have an old home with some older piping. Finding someone that works on steam boilers is tough. When they looked at the install, they explained what needed to happen clearly deand unrstandable."
Vinnie H on November 2024
Looking for a reliable drain cleaning company in the Sanford, ME area? You’ve come to the right place! Sgt. Smith’s Drain Cleaning Services is available 24/7 to take care of all your drain cleaning needs, no matter how severe. We work with top-of-the-line plumbing camera inspection equipment to detect and eliminate clogs quickly and efficiently. Whether you need professional drain cleaning services for your residential home or commercial property, when you team up with our plumbers, you can rest assured that your system is in excellent hands. In addition to our quality workmanship and industry-leading equipment, we also offer a level of dedication and attention to detail you won’t find from any other local plumbing company. Our owner and founder, Sgt. Micah Smith, previously served in the U.S. Marine Corps for over 8 years, and so approaches every job as an opportunity to serve a fellow community member with pride. Give us a call today at (207) 432-9378 and let us restore your drainage system to pristine condition! Our 24-hour plumbers are standing by and ready to meet your needs.
"Replaced as expected. Nice work! Very professional."
CHRISTOPHER M on March 2024
Looking for a reliable drain cleaning company in the Sanford, ME area? You’ve come to the right place! Sgt. Smith’s Drain Cleaning Services is available 24/7 to take care of all your drain cleaning needs, no matter how severe. We work with top-of-the-line plumbing camera inspection equipment to detect and eliminate clogs quickly and efficiently. Whether you need professional drain cleaning services for your residential home or commercial property, when you team up with our plumbers, you can rest assured that your system is in excellent hands. In addition to our quality workmanship and industry-leading equipment, we also offer a level of dedication and attention to detail you won’t find from any other local plumbing company. Our owner and founder, Sgt. Micah Smith, previously served in the U.S. Marine Corps for over 8 years, and so approaches every job as an opportunity to serve a fellow community member with pride. Give us a call today at (207) 432-9378 and let us restore your drainage system to pristine condition! Our 24-hour plumbers are standing by and ready to meet your needs.
"Replaced as expected. Nice work! Very professional."
CHRISTOPHER M on March 2024
Clear Choice Home Improvements is dedicated to delivering high-quality services in roofing, siding, windows, bathrooms, and gutters with integrity and professionalism. With over 20 years of experience, we empower our customers to confidently undertake home improvement projects and truly enjoy their homes. We take great care to ensure that our craftsmen are properly trained and certified. Our sales staff and customer service representatives leverage their extensive experience to uphold our promise of guaranteed, trouble-free installations. From the very beginning, we welcome any questions or concerns you may have during the renovation process. Our goal is to provide you with beautiful and practical home improvements that will stand the test of time, giving you peace of mind knowing you’ve made an excellent choice for your home.
"Watch out, different employees have us very different estimates. One was honest and one tried to way overprice our roofing project. Also during the installation they tried to skip replacing plywood as we’d agreed upon without discussing with us first. Luckily my husband was home and caught the mistake. There were definitely some good things too, the knowledge and quality of materials was excellent. They got our entire project done in one day and worked very hard."
Elizabeth J on January 2025
Clear Choice Home Improvements is dedicated to delivering high-quality services in roofing, siding, windows, bathrooms, and gutters with integrity and professionalism. With over 20 years of experience, we empower our customers to confidently undertake home improvement projects and truly enjoy their homes. We take great care to ensure that our craftsmen are properly trained and certified. Our sales staff and customer service representatives leverage their extensive experience to uphold our promise of guaranteed, trouble-free installations. From the very beginning, we welcome any questions or concerns you may have during the renovation process. Our goal is to provide you with beautiful and practical home improvements that will stand the test of time, giving you peace of mind knowing you’ve made an excellent choice for your home.
"Watch out, different employees have us very different estimates. One was honest and one tried to way overprice our roofing project. Also during the installation they tried to skip replacing plywood as we’d agreed upon without discussing with us first. Luckily my husband was home and caught the mistake. There were definitely some good things too, the knowledge and quality of materials was excellent. They got our entire project done in one day and worked very hard."
Elizabeth J on January 2025
We pride ourselves on reliability, communication, integrity, and quality work. We are experts in our trade. We look forward to earning your business! Please call 978-941 5561 For all drain and sewer services
"Bright knows exactly what he's doing and how to fix a major plumbing issue. Very professional, prompt, has very clear communication, is hard working, very hard working, and personable. He has the proper equipment do diagnose and fix the problem in a timely manner. His knowledge of plumbing is also exemplary. It was a pleasure doing business with him and will hire him for future jobs. Thank you Bright!"
Ava D on January 2022
We pride ourselves on reliability, communication, integrity, and quality work. We are experts in our trade. We look forward to earning your business! Please call 978-941 5561 For all drain and sewer services
"Bright knows exactly what he's doing and how to fix a major plumbing issue. Very professional, prompt, has very clear communication, is hard working, very hard working, and personable. He has the proper equipment do diagnose and fix the problem in a timely manner. His knowledge of plumbing is also exemplary. It was a pleasure doing business with him and will hire him for future jobs. Thank you Bright!"
Ava D on January 2022
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
"Charlie came out and in no time cleared the blockage. When I called they said about 2 hrs , he was here within an hr. He was very professional, knowledgeable and affordable. Definitely recommend this company."
pamela p on February 2025
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
"Charlie came out and in no time cleared the blockage. When I called they said about 2 hrs , he was here within an hr. He was very professional, knowledgeable and affordable. Definitely recommend this company."
pamela p on February 2025
The average cost to snake your main sewer line is around $250 for a simple snake. Most sewer line specialists charge between $45 and $200 per hour for main sewer line snaking, so the time involved plays a major role. The price you’ll pay will depend on the severity of the clog, the item causing the backup, how long it takes to remove the item, and more. A more severe issue that requires unclogging a main sewer line will cost $3,100 on average.
The average cost to unclog a drain is around $200, with prices ranging between $110 and $800, depending on the type of drain and the extent of the clog. Hiring a professional to snake the toilet or sink will usually cost between $110 and $275, a bathtub or shower typically costs around $225, and a main line clog can cost between $100 and $800 based on the severity of the clog and how far beyond the access point the clog sits. Since the labor involved varies, most plumbers will charge an hourly rate for drain cleaning.
Yes, most states require plumbers to be licensed, and for good reason. Hiring an unlicensed plumber could lead to poor quality work, costly future expenses, and potential code violations.
As you browse our pro listings, take note of the “Angi Approved” badge. Angi Approved businesses meet our standards for certification which include:
The owner, principal, or relevant manager passed a criminal background check
Required to have applicable state and local licenses
Maintain an average star rating of 3.0 or better on our network, if they have at least one review
Paying to advertise their services
Meeting any other eligibility criteria required by Angi
Keep in mind licensing is different from certifications. A license is a legal requirement to operate a business, while certifications are voluntary.
You should not attempt to snake your sewer yourself. Accessing and snaking your sewer requires heavy-duty equipment, and while renting is possible, misusing it can damage your sewer main and leave you with very expensive repair costs, not to mention potential environmental issues and severe water damage. Accessing your sewer also exposes you to hazardous sewer gasses, and failing to seal the sewer properly after work can be very dangerous. It’s always best to hire a professional sewer cleaner near you to handle this type of work.
The average cost to hire a plumber is around $100 an hour but can vary between $45 and $200 an hour depending on the plumber’s experience and the repair that you need. It’s also important to note that these prices can go up on holidays, and emergency plumber rates average $150 per hour, in addition to a flat-rate trip fee of $100 to $350.