Get matched with top toilet pros in Red Cloud, NE

The most common reasons a toilet won’t stop running are a faulty flapper or fill valve, improper fill height, or incorrect chain length. Luckily, all these issues are relatively easy to fix with parts you can find at a local hardware store. You can also call a plumber or toilet repair professional to solve the problem.

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

Yes, a toilet, sink, and shower can share the same vent. This is a common plumbing practice that can simplify installation and save space. When sharing a vent, it's important that the toilet is located downstream from all other fixtures. You will also need to ensure the vent pipe is large enough to handle the demands of all connected fixtures without compromising its effectiveness. Because requirements can vary, you should always check your local building and plumbing codes. Consulting a qualified plumber is recommended to ensure the vent is properly sized, installed, and adheres to all local regulations.

For best results, you should remove the toilet in a bathroom before removing tile or installing new tile. If you don’t remove the toilet, it will be harder to fully waterproof the tile around the toilet, which could increase the risk of mold growth or plumbing leaks. If you have trouble removing the toilet, hire a plumber to help.