Get matched with top fencing pros in Paxton, NE

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

Vinyl and chicken wire are two of the best and most affordable materials for a DIY garden fence. Vinyl is a great option because it is cost-effective, easy to work with, and effective at keeping pests out. A vinyl fence can cost as little as $15 per linear foot, especially if you install it yourself. Chicken wire is even more budget-friendly, costing as little as $2 per linear foot. While chicken wire is more affordable, vinyl is a better choice if privacy is a concern. You can also add chicken wire on top of a vinyl fence for extra security.

Most homeowners don't need to inform their neighbors before constructing a fence, according to the law, but you will need to make sure that you’re building on the property line or on your side of the property line. Otherwise, the neighbor could complain, which would require you to tear down and reinstall the fence. In any case, keeping them in the loop is the neighborly thing to do!

Whether you inform your neighbors or not, always use property records and a land survey to ensure your fence stays within your property boundaries.

Installing an aluminum fence typically takes one to three days, depending on the fence's size, layout complexity, and site conditions. Simple, straight-line installations may take just a day, while larger or more intricate designs with slopes or obstacles can extend the timeline. Professional contractors often complete the job faster than DIY installations.