Get matched with top stone and gravel pros in Paxton, NE

Yes, depending on the type of pavers you have, you may need a specific type of sealant. For example, concrete pavers will bond differently than clay pavers or faux stone pavers and will demand a different type of sealer. If you’re unsure of the material and what type of sealant you need, you can contact the company that laid your pavers down for you.

Painted exterior brick does not usually need sealing. Brick is a porous material, so you don’t want to apply a sealant that could trap moisture inside the bricks and cause erosion and structural damage. The risk of moisture-induced damage after sealing is higher in colder climates where trapped moisture can expand if it freezes. On the other hand, it makes sense to seal really old brick or kitchen backsplashes, where moisture from cooking can weaken the brick.

Limewash can be removed from brick, but the method of removal will depend on how long the limewash has been on the brick. If the limewash has fully dried—which happens after about five days—you’ll need to use a diluted muriatic acid mixture to remove it. If there are multiple coats of limewash, you may need to apply the acid mixture several times to fully remove it from the brick.

Yes, masonry is more expensive than concrete because the labor is much more involved. With masonry, your expert will build your project from the ground up, one piece at a time, ensuring they use the proper amount of mortar or grout during construction and keeping the project level or plumb. Pouring concrete can also be labor-intensive, but it’s a bit less involved. It requires building a mold, pouring the concrete, and letting it cure. The less intensive labor makes concrete a more affordable option in most cases.