Get matched with top fencing pros in Curtis, NE

Wood, vinyl, chain link, and aluminum are common materials. Choose based on durability, maintenance needs, and aesthetics.

The cheapest farm fences are typically wire fences, which cost less to install than traditional lumber fences. Barbed wire is one of the most inexpensive options due to its simple materials, making it a good choice for low budgets. It is suitable for confining docile animals in large spaces, as it provides a visual barrier and a mild deterrent. Other options like hog wire and woven wire fences are also cost-effective because they require less lumber than a full wooden fence. These types of wire fences are strong, long-lasting, and relatively easy to repair, though they are often considered less aesthetically pleasing than wood.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.