Get matched with top woodworkers in Pelham, NC

Q: Do I need special lumber for framing a house?

• <div><p>Learning <a href="https://www.angi.com/articles/how-to-frame-house.htm">how to frame a house</a> includes picking the right lumber for the job. Most people will want to pick pine, spruce, or fir for the framing. These types of lumber are affordable and produce sturdy framing for structures. Look for kiln-dried lumber to reduce the risk of shrinkage or insect damage after installation. As part of what&rsquo;s included in framing a house when you hire a professional, the contractor should order the lumber, so you don&rsquo;t have to worry about finding the right lumber.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: Why are carpenters so expensive?

• <div><p>Carpentry is a skilled trade and requires many years of experience to acquire the skills necessary to do the job efficiently and correctly. Because every home requires a carpenter at some stage of the building process, carpenters are typically in high demand. The higher the skill level, the higher the hourly rate the carpenter can charge.</p></div>

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Pelham, NC?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Pelham, NC

*The Angi rating for Woodworking companies in Pelham, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Pelham, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on January 13, 2026

Reviewed in January 2026
Rigging tree Service cut down a few trees for us and ground the stumps and they also limbed up the trees overhanging our historic building. They were very professional and rigged everything, so nothing hit or damaged our historic buildings and they were very thorough with cleanup. I highly...
Rigging Tree Service
Request a quote
Reviewed in May 2025
Excellent service. They helped move heavier furniture, removed command strips backings, spackled and put on two coats of paint. Even moved the heavier furniture back into place. They were very polite and accomodating.
White Dove Painting
Request a quote
Reviewed in November 2024
Very pleasant and professional. Did a great job of removing a large leaning oak tree . Cleaned the debris out of the yard. Used safety measures during the cutting and removing of the tree. They donate the trees to those who need firewood and would not be able to afford to purchase it. They state...
Scalla LLC
Request a quote
Reviewed in May 2024
Fantastic! James and Mitch are exceptional craftsman! They were very polite and help full in every way. The walls now look brand new and there is no trace of the previous damage to the walls. They quickly responded to my Angi request. James came out quickly and an estimate that was fair given....
Go Dry Drywall Repair
Request a quote
Reviewed in December 2023
Great work ,finished the deck in no time and did a great work. I definitely will call this company again .
W T Shelton Construction LLC
Request a quote
Reviewed in September 2023
Highly recommend this company for any type of yard maintenance you may need. Reasonably priced, on time, professional, great quality work, and always cleans up when they are finished. They have trimmed a huge tree, removed another tree and stump, and have done yard maintenance for me.
Walkers tree service
Request a quote
Reviewed in May 2023
Mr Nesmith has done several projects for me including putting on a new roof, repairing a screened in back porch repair and currently completing a bathroom remodel. Very nice guy with fair pricing.
Nesmith Home Improvement
Request a quote
Reviewed in April 2023
Workmanship was outstanding and professionally completed. Later I had my kitchen completely updated. I highly recommend this company.
Zerefla Home Improvement LLC
Request a quote
Reviewed in February 2022
Great job! Did such a great job cutting my tree. They also helped me with making my yard again. I recommend this company!
Wall Brother's Tree Service
Request a quote
Reviewed in October 2021
Hubby and I are very pleased with how the refinishing of the pine hardwood floor turned out.
Footprints Floors of Durham, Winston-Salem, and Concord
Request a quote

Find Woodworkers in Pelham

Renovation Warriors LLC

5.0(

)

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+3 more

Serving Pelham, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Emergency services offered

"This was the first time the lawn got mowed since the house was built. They did a real nice job.”"

+10

Response time4 hrs

Response rate95%

Recommended by42%of homeowners

Custom Cabinets - Build

Serving Pelham, NC and surrounding areas

Approved

In business since 2019

Warranties offered

Credit card accepted

"We have been working with Sean for the last couple of months on our kitchen design and renovation planning. The process has been exactly what we were looking for. Sean has been really helpful in interpreting our wants and needs into a design that will work for us and our space."

+90

Response time2 days

2 neighbors recently requested a quote

Recommended by83%of homeowners

Request Quote

Antonio Remodeling & Renovations

4.5(

)

Carport (Wood) - Build

Serving Pelham, NC and surrounding areas

Approved

In business since 1997

Free estimates

Customers say: True professional

"I would highly recommend. Excellent work."

+110

12 neighbors recently requested a quote

Recommended by81%of homeowners

Request Quote

M&D Property Solutions

4.5(

)

Closet - BuildCustom Cabinets - BuildGazebo or Freestanding Porch - Repair+2 more

Serving Pelham, NC and surrounding areas

Approved

In business since 2017

Emergency services offered

Warranties offered

"Needed fencing installed to keep groundhogs from taking up residence under our deck. Brady came up with a creative and complete solution that made sure the varmints were out and would not return. Would use again."

+10

Response time1 day

1 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

J&W Handyman Services

4.4(

)

Gazebo or Freestanding Porch - Repair

Serving Pelham, NC and surrounding areas

Approved

In business since 2015

Free estimates

Small jobs welcome

"They did a great job with the steps and railing on my back deck. They were there when they said when they would be there, and the work was completed on schedule. Very easy to work with."

3 neighbors recently requested a quote

Recommended by72%of homeowners

Serving Pelham, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2007

Free estimates

Warranties offered

"Project was to design and install a closet system for a large reach in closet. Estimator arrived on time, helped to design the closet and provided all the needed information. Installer was excellent and the closet looks beautiful. We are very pleased with all the services. David"

Contemporary Entry - Seat Beach Floral Pattern Cushion

+62

468 neighbors recently requested a quote

Recommended by90%of homeowners

Custom Cabinets - Build

Serving Pelham, NC and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

"They updated both my kitchen and my screened-in patio and did a great job with both. They completed both in five weeks. They cleaned up after themselves. Discussed any changes or decisions that we needed to make together. I am very pleased with the work and would recommend them to anyone."

13 neighbors recently requested a quote

Carpentry Framing - InstallCloset - BuildInterior Trim and Decorative Moldings - Install+1 more

Serving Pelham, NC and surrounding areas

Approved

Emergency services offered

Credit card accepted

Offers commercial services

"Amazing remodel transformation for my home office! JJB Renovations turned my back bedroom into a beautiful and fully functional home office...complete with huge new window space!! I am in love with my new workspace and finally don't feel "closed in" while I work and enjoy the views from my new office windows. JJB replaced old flooring that needed to be replaced, fixed walls that were damaged, installed 2 new windows that included exterior vinyl siding work, completed required framing and trim, and installed all new flooring. Best investment I have made and will call on JJB Renovations for each and every task need they cover! Christina K. Avory Home Care Solutions, LLC"

1 neighbors recently requested a quote

Carpentry Framing - InstallCustom Cabinets - Build

Serving Pelham, NC and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

25 neighbors recently requested a quote

Request Quote

Ryan Howes

New to Angi

Furniture - Build Custom

Serving Pelham, NC and surrounding areas

Approved

Hello my name is Ryan Howes, I am 22 years old, and I have been in construction since I was 15. From masonry, carpentry, exterior services, all the way to drywall and painting, I specialize in custom projects made to suit each individuals wants and needs, and also repair/ remodel jobs. Whatever your needing done, odds are in the man that can do it for you!!

Request Quote

...

Showing 1-10 of 92

Woodworking questions, answered by experts

Learning how to frame a house includes picking the right lumber for the job. Most people will want to pick pine, spruce, or fir for the framing. These types of lumber are affordable and produce sturdy framing for structures. Look for kiln-dried lumber to reduce the risk of shrinkage or insect damage after installation. As part of what’s included in framing a house when you hire a professional, the contractor should order the lumber, so you don’t have to worry about finding the right lumber.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Carpentry is a skilled trade and requires many years of experience to acquire the skills necessary to do the job efficiently and correctly. Because every home requires a carpenter at some stage of the building process, carpenters are typically in high demand. The higher the skill level, the higher the hourly rate the carpenter can charge.

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

The Pelham, NC homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Audrey Bruno
•
Jul 9, 2026Jul 9, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.