Get matched with top woodworkers in Eden, NC

Q: What are the spindles on a deck called?

• <div><p>Spindles on a deck may also be called balusters or pickets. While not as important to the structural support of the deck as the rail posts, they play a critical role in ensuring the deck is safe to use by closing in large gaps in the railing. For this reason, balusters must be no more than 4 inches away from one another.</p></div>

Q: What do most carpenters charge per hour?

• <div><p>On average, the cost to hire a carpenter ranges from about <b>$75 to $100 per hour</b>, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.</p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: Should you tip a carpenter?

• <div><p>No, you do not usually tip a carpenter for their work. However, if you&rsquo;ve been very happy with the level of service and quality of work, a 10% to 20% tip would likely be accepted with thanks. If you&rsquo;re not sure, it can help to discuss the carpenter&rsquo;s policy or preference for tipping before beginning the project.</p></div>

Q: How do you cut trim for doorways?

• <div><p>There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you&rsquo;re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you&rsquo;ll need to power up the saw again with a new piece. </p><p>Butted joints&mdash;also called shaker style&mdash;don&rsquo;t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Eden, NC?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Eden, NC

*The Angi rating for Woodworking companies in Eden, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Eden, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on October 27, 2025

Reviewed in October 2025
Craig and Chris were both very professional and pleasant to work with. We hired them to repair our front room and they did a wonderful job. Check out the before and after pictures. They also hung our TV on the fireplace, which wasn't an easy task, but they took it on and completed it without...
Save The Day Handyman Solutions
Request a quote
Reviewed in June 2025
Awesome job. Excellent craftsmanship. We love our new deck. We had several deck building companies to quote our project. We made the right choice to go with DP&C, LLC. They stained the deck to match the house and it looks wonderful. They also tore down our old rotten deck which was not small...
Daniel Paint & Ceramic, LLC
Request a quote
Reviewed in May 2025
Excellent service. They helped move heavier furniture, removed command strips backings, spackled and put on two coats of paint. Even moved the heavier furniture back into place. They were very polite and accomodating.
White Dove Painting
Request a quote
Reviewed in April 2025
The guys were great and did a outstanding job with limbing up the tree that had grown over my roof, they were very kind and knowledgeable about know how to limb the tree up and make it look nice when they finished, and they cleaned up and blowed all the debris that was left after the job and...
JP's Lawn & Tree
Request a quote
Reviewed in October 2024
Mr Turner showed up on time and had all the right equipment to get the job done. He got the job done and I was very pleased with his work. I will definitely be calling him again to do more tree work!!
Christopher Turner
Request a quote
Reviewed in April 2023
Workmanship was outstanding and professionally completed. Later I had my kitchen completely updated. I highly recommend this company.
Zerefla Home Improvement LLC
Request a quote
Reviewed in February 2023
Bo refinished the main hardwood floors and added matching hardwood in the master bedroom. It is all absolutely beautiful! His professional work ethic and attention to detail is outstanding. The price was extremely fair. We highly recommend Burwell Hardwood for your next job!
Burwell Hardwood Floors
Request a quote
Reviewed in January 2023
We have used James and his team for many years. Jobs completed included landscaping , rock wall structures, rock walkways , and beautiful lighting that not only lights pathways but highlights stone structures as well . He keeps a clean job site, is always prompt, and reasonably priced. Look...
Lit Services LLC
Request a quote
Reviewed in May 2022
kitchen and cabinets painting in one day ! . The crew were great and finished the job on schedule."
Real Remodeling of NC, LLC
Request a quote
Reviewed in May 2021
Blue Jean Remodeling is very professional and dependable. Has done full bathroom remodeling, painting, flooring, window and door replacement and other work as well. Always pleased with the quality of work. Highly recommend this company.
Blue Jean Remodeling
Request a quote

Find Woodworkers in Eden

Renovation Warriors LLC

5.0(

)

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+3 more

Serving Eden, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Emergency services offered

"This was the first time the lawn got mowed since the house was built. They did a real nice job.”"

+10

Response time4 hrs

Response rate95%

Recommended by42%of homeowners

Custom Cabinets - Build

Serving Eden, NC and surrounding areas

Approved

In business since 2019

Warranties offered

Credit card accepted

"We have been working with Sean for the last couple of months on our kitchen design and renovation planning. The process has been exactly what we were looking for. Sean has been really helpful in interpreting our wants and needs into a design that will work for us and our space."

+90

Response time2 days

4 neighbors recently requested a quote

Recommended by83%of homeowners

Request Quote

Antonio Remodeling & Renovations

4.5(

)

Carport (Wood) - Build

Serving Eden, NC and surrounding areas

Approved

In business since 1997

Free estimates

Customers say: True professional

"I would highly recommend. Excellent work."

+110

11 neighbors recently requested a quote

Recommended by81%of homeowners

Request Quote

M&D Property Solutions

4.5(

)

Closet - BuildCustom Cabinets - BuildGazebo or Freestanding Porch - Repair+2 more

Serving Eden, NC and surrounding areas

Approved

In business since 2017

Emergency services offered

Warranties offered

"It has worked out so well for me and my family. And yeah, please do it all day. Please let me know if I can help. Please let me know when I get home, and I will be home in the next few days. Please let me know when I can get you. Please let me know when I get back. Please let me know if I need anything else. Please let me know if I can get you a text or text me or text or call me when I can."

+10

Response time1 day

1 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

J&W Handyman Services

4.4(

)

Gazebo or Freestanding Porch - Repair

Serving Eden, NC and surrounding areas

Approved

In business since 2015

Free estimates

Small jobs welcome

"They did a great job with the steps and railing on my back deck. They were there when they said when they would be there, and the work was completed on schedule. Very easy to work with."

3 neighbors recently requested a quote

Recommended by72%of homeowners

Request Quote

Kitchen Tune-Up Northwest Greensboro

4.9(

)

Custom Cabinets - Build

Serving Eden, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Credit card accepted

"Our kitchen looks beautiful now! Kitchen Tune-Up was excellent to work with. They were on-time, worked efficiently and even finished up a day earlier than expected. Would highly recommend them!"

Response time2 days

Response rate97%

16 neighbors recently requested a quote

Serving Eden, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2007

Free estimates

Warranties offered

"Project was to design and install a closet system for a large reach in closet. Estimator arrived on time, helped to design the closet and provided all the needed information. Installer was excellent and the closet looks beautiful. We are very pleased with all the services. David"

Contemporary Entry - Seat Beach Floral Pattern Cushion

+62

768 neighbors recently requested a quote

Recommended by90%of homeowners

Carpentry Framing - InstallCustom Cabinets - Build

Serving Eden, NC and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

23 neighbors recently requested a quote

Request Quote

Ryan Howes

New to Angi

Furniture - Build Custom

Serving Eden, NC and surrounding areas

Approved

Hello my name is Ryan Howes, I am 22 years old, and I have been in construction since I was 15. From masonry, carpentry, exterior services, all the way to drywall and painting, I specialize in custom projects made to suit each individuals wants and needs, and also repair/ remodel jobs. Whatever your needing done, odds are in the man that can do it for you!!

1 neighbors recently requested a quote

Request Quote

Zen Dens

New to Angi

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+2 more

Serving Eden, NC and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

Outdoors enthusiast with a background in multiple shed/barn manufacturing facilities.\n\nSpecialize in wood structure builds and repairs.

Request Quote

...

Showing 1-10 of 118

Woodworking questions, answered by experts

Spindles on a deck may also be called balusters or pickets. While not as important to the structural support of the deck as the rail posts, they play a critical role in ensuring the deck is safe to use by closing in large gaps in the railing. For this reason, balusters must be no more than 4 inches away from one another.

On average, the cost to hire a carpenter ranges from about $75 to $100 per hour, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

No, you do not usually tip a carpenter for their work. However, if you’ve been very happy with the level of service and quality of work, a 10% to 20% tip would likely be accepted with thanks. If you’re not sure, it can help to discuss the carpenter’s policy or preference for tipping before beginning the project.

There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece.

Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.

The Eden, NC homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.