Get matched with top woodworkers in Providence, NC

Q: What is the difference between a spindle and a baluster?

• <div><p>Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters. </p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: Do I need special lumber for framing a house?

• <div><p>Learning <a href="https://www.angi.com/articles/how-to-frame-house.htm">how to frame a house</a> includes picking the right lumber for the job. Most people will want to pick pine, spruce, or fir for the framing. These types of lumber are affordable and produce sturdy framing for structures. Look for kiln-dried lumber to reduce the risk of shrinkage or insect damage after installation. As part of what&rsquo;s included in framing a house when you hire a professional, the contractor should order the lumber, so you don&rsquo;t have to worry about finding the right lumber.</p></div>

Q: How do you cut trim for doorways?

• <div><p>There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you&rsquo;re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you&rsquo;ll need to power up the saw again with a new piece. </p><p>Butted joints&mdash;also called shaker style&mdash;don&rsquo;t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.</p></div>

Q: Can you cut baseboards without using a miter saw?

• <div><p>If you don&rsquo;t have a power saw with a blade where you can adjust the angle, you could use a miter box and hand saw to make the cuts. The miter box contains wide slots to support the piece of baseboard and other narrow slots to accommodate the blade of the hand saw. However, it&rsquo;s tough to make non-standard cuts beyond 30 or 45 degrees when using a miter box.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Providence, NC?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Providence, NC

*The Angi rating for Woodworking companies in Providence, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Providence, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on August 19, 2026

Reviewed in August 2026
Excellent work. Keeps everything nice and trimmed.
Denny Lawn Care
Request a quote
Reviewed in January 2026
Rigging tree Service cut down a few trees for us and ground the stumps and they also limbed up the trees overhanging our historic building. They were very professional and rigged everything, so nothing hit or damaged our historic buildings and they were very thorough with cleanup. I highly...
Rigging Tree Service
Request a quote
Reviewed in September 2025
I hired the Guerrero brothers to replace a porch for me. Luis came took measurements. Later called me with a price for decking. Came the next day on time to start the job. The Guerrero brothers does “Excellent Work”. I was very pleased with their work, cleaning everything up when they finished....
Renovation Warriors LLC
Request a quote
Reviewed in August 2025
I’ll give Mr John Evans of Evans Landwork 5 star review and more if I could. He did an excellent job on my driveway that had washout from all the rain we’ve had. He redid my entire driveway. Reworking the side ditch’s plus installed a drain pipe on the first day by himself. Working from about...
Evans LandWork
Request a quote
Reviewed in April 2025
I recently had my roof, gutters, and siding replaced, and I couldn’t be more pleased with the entire experience. Kyrillos, the project manager, was outstanding he kept me updated throughout the whole process, answered all my questions promptly, and made sure everything stayed on schedule. The...
Home Genius Exteriors
Request a quote
Reviewed in November 2024
Very pleasant and professional. Did a great job of removing a large leaning oak tree . Cleaned the debris out of the yard. Used safety measures during the cutting and removing of the tree. They donate the trees to those who need firewood and would not be able to afford to purchase it. They state...
Scalla LLC
Request a quote
Reviewed in December 2023
Great work ,finished the deck in no time and did a great work. I definitely will call this company again .
W T Shelton Construction LLC
Request a quote
Reviewed in September 2023
Did a great job on my deck rebuild and in a timely manner very affordable a job well done also did a excellent job on my neighbors front porch. I plan on hiring them for my front porch as well..
Palmer's Seaside Maintenance and Repair
Request a quote
Reviewed in May 2023
Mr Nesmith has done several projects for me including putting on a new roof, repairing a screened in back porch repair and currently completing a bathroom remodel. Very nice guy with fair pricing.
Nesmith Home Improvement
Request a quote
Reviewed in September 2022
I've used 3 or 4 different tree & lawn services over the years. County Tree & Property was better than previous services that I've hired. They responded quickly and did the job the next day. Their people were all polite and friendly. They removed one large dead tree, trimmed several other trees...
County Tree and Property Renovation
Request a quote

Find Woodworkers in Providence

Renovation Warriors LLC

5.0(

)

Carpentry Framing - InstallCarpentry Framing - RepairCarport (Wood) - Build+3 more

Serving Providence, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Emergency services offered

"This was the first time the lawn got mowed since the house was built. They did a real nice job.”"

+10

Response time4 hrs

Response rate95%

Recommended by42%of homeowners

Custom Cabinets - Build

Serving Providence, NC and surrounding areas

Approved

In business since 2019

Warranties offered

Credit card accepted

"We have been working with Sean for the last couple of months on our kitchen design and renovation planning. The process has been exactly what we were looking for. Sean has been really helpful in interpreting our wants and needs into a design that will work for us and our space."

+90

Response time2 days

5 neighbors recently requested a quote

Recommended by83%of homeowners

Request Quote

Antonio Remodeling & Renovations

4.5(

)

Carport (Wood) - Build

Serving Providence, NC and surrounding areas

Approved

In business since 1997

Free estimates

Customers say: True professional

"I would highly recommend. Excellent work."

+110

7 neighbors recently requested a quote

Recommended by81%of homeowners

Request Quote

M&D Property Solutions

4.5(

)

Closet - BuildCustom Cabinets - BuildGazebo or Freestanding Porch - Repair+2 more

Serving Providence, NC and surrounding areas

Approved

In business since 2017

Emergency services offered

Warranties offered

"Needed fencing installed to keep groundhogs from taking up residence under our deck. Brady came up with a creative and complete solution that made sure the varmints were out and would not return. Would use again."

+10

Response time1 day

1 neighbors recently requested a quote

Recommended by100%of homeowners

Serving Providence, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2007

Free estimates

Warranties offered

"Project was to design and install a closet system for a large reach in closet. Estimator arrived on time, helped to design the closet and provided all the needed information. Installer was excellent and the closet looks beautiful. We are very pleased with all the services. David"

Contemporary Entry - Seat Beach Floral Pattern Cushion

+62

904 neighbors recently requested a quote

Recommended by90%of homeowners

Furniture - Build Custom

Serving Providence, NC and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

We are a trustworthy, reliable, honest, and dependable team of professional handymen and remodelers.

30 neighbors recently requested a quote

Carpentry Framing - InstallCustom Cabinets - Build

Serving Providence, NC and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

23 neighbors recently requested a quote

Request Quote

DAHAB

New to Angi

Furniture - Build Custom

Serving Providence, NC and surrounding areas

Approved

Hi! 👋 Thanks for reaching out! I’d love to help with your project.\n\nI offer house & deep cleaning, bathroom/bedroom cleaning, floor cleaning, interior painting, baseboards, fence & deck painting/staining, and general handyman services.\n\n

Request Quote

Premier Builders

New to Angi

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+6 more

Serving Providence, NC and surrounding areas

Approved

30 years of carpentry experience covering everything from custom decks and screen porches to custom cabinetry and built-ins Premier Builders provides the highest quality on all of your projects

Request Quote

DNI exterior

New to Angi

Carpentry Framing - InstallCarpentry Framing - Repair

Serving Providence, NC and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

I am 34, married with 2 kids, I love the family life. Been doing construction for 15 years now. Mostly do all kids of siding, windows/ doors. Also have lots of plumbing experience, and can operate escavator and skidsteer. Can do framing and fences or benches. I've done professional moving, and can do laminate floors.

3 neighbors recently requested a quote

Request Quote

...

Showing 1-10 of 102

Woodworking questions, answered by experts

Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

Learning how to frame a house includes picking the right lumber for the job. Most people will want to pick pine, spruce, or fir for the framing. These types of lumber are affordable and produce sturdy framing for structures. Look for kiln-dried lumber to reduce the risk of shrinkage or insect damage after installation. As part of what’s included in framing a house when you hire a professional, the contractor should order the lumber, so you don’t have to worry about finding the right lumber.

There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece.

Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.

If you don’t have a power saw with a blade where you can adjust the angle, you could use a miter box and hand saw to make the cuts. The miter box contains wide slots to support the piece of baseboard and other narrow slots to accommodate the blade of the hand saw. However, it’s tough to make non-standard cuts beyond 30 or 45 degrees when using a miter box.

The Providence, NC homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.