Get matched with top toilet pros in Hays, NC

Basement toilets don’t always need a pump. However, it is the most common setup because plumbing systems use gravity to move waste away from the home. Basement toilets often sit below the home’s main sewage system, and installing a sewage ejector pump pushes the wastewater and sewage up to the main sewer line. Alternatively, you can use an upflush or macerator toilet that breaks down the waste and pushes it straight to the main sewer line rather than via a sewer line from the bathroom.

While technically possible, it is unlikely that a clogged toilet will fix itself. Clogs caused by water-soluble materials like toilet paper or human waste may eventually break down in the water, allowing flow to resume. However, this can take time, and any clogs from solid objects require manual removal. In most scenarios, especially if you don't have another bathroom, it is best to fix the clog yourself or call a plumber.

If you notice water coming out of the bottom of your tank or the flush handle, you obviously have a leaking tank. Water on the side of the tank can indicate cracks. Other signs include the toilet running and flushing without anyone touching the handle, needing to jiggle the handle to make the water stop after flushing, or needing to hold the handle down to empty the water tank.

If you’ve accessed the bolts and nuts that hold your toilet seat in place and can’t unscrew them, it’s possible that they were overtightened or that the material corroded over time, making it impossible to unscrew. If that’s the case, you can either call in a plumber for help, or you can DIY a solution if you’re careful. Lay down masking tape around the mounting bracket and then use the tape as a surface to lay a hack saw blade. Move slowly to cut through the bracket and bolt, being careful not to damage the porcelain in the process.