Get matched with top roofers in Eden, NC

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

Yes, thatched roofs are legal in most areas in the U.S., but you should always check your local building codes to ensure there are no restrictions in your particular area before installing one. Even where they are legal, you’ll usually need to apply fireproofing to the roof to keep it up to code. Keep in mind that a new roof might not increase home value as much if you choose a thatched roof, as they aren’t common in the U.S. and might not be as desirable to many home buyers.

Unlike wood decks, Trex decking doesn’t warp. That’s one of the key benefits of installing this decking material. Over time, common issues with these decks include hard water stains, mold or mildew growth, and stains from food spills. Thankfully, with proper cleaning, you can get rid of most stains and mold.

The most common defect in a flat roof is leaking. Flat roofs have minimal slope, so water pools more readily on a flat roof than on a sloped roof, and the risk of the waterproof membrane failing increases with exposure. Tears and punctures from foot traffic and blown debris are other common problems, especially with single-ply roofing membranes like TPO and EPDM roofs.