Get matched with top roofers in Walnut Cove, NC

While a few icicles on your roof are standard, a large accumulation can be a sign of a bigger problem, such as poor insulation. This is particularly true if you are also dealing with ice dams. If you have numerous large icicles, it is recommended to have a roofing contractor diagnose potential insulation issues and create a plan to solve them.

It’s possible for a roofing estimate to change after the initial assessment, but in most cases, it shouldn’t. There’s always the risk that something unexpected will happen that causes prices to go up, like discontinued materials or your roofer discovering previously hidden damage to your decking when ripping off the old roof. However, experienced roofers should account for these circumstances in their initial estimates. Roofing contracts are binding, so always check your contract for language about how and why your numbers could change.

For homeowners who plan to stay in their homes for a long time or never want to have to deal with replacing a roof again, rubber roof shingles are likely worth the added investment amount over asphalt shingle varieties. While the initial cost of installing a rubber shingle roof will be significantly higher, their long life spans can be worth it in the long term. Consider the curb appeal of a rubber roof, though, as other roofing materials, like metal, can look better and offer even greater value.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.