Get matched with top electricians in Metcalfe, MS

Upgrading your amp service could possibly be a solution to tripped breakers. Circuit breakers in an electrical panel trip as a safety measure when something goes wrong with the current, and that’s often caused by plugged-in devices trying to draw too much current. Replacing the electrical panel with a new model and new breakers designed for higher amps can fix this problem.

While circuit breakers are designed to be reset after tripping, there isn't a strict countdown to when they will fail. The primary danger lies in a breaker tripping multiple times in a short period without allowing the components to cool down. Theoretically, a standard breaker might handle around 50 trips caused by simple overloading. However, this number can be much lower in practice. For instance, a high-current fault could damage a breaker to the point that it needs replacement after only two resets. Repeatedly resetting a breaker that trips frequently exacerbates the underlying problem by causing the electrical components, wires, and the breaker itself to overheat. This can lead to permanent damage, cause the breaker to trip unnecessarily in the future, and increase the risk of an electrical fire. If a breaker trips every few minutes, you should leave it in the 'off' position and call a qualified electrician for an inspection.

Circuit breakers can wear out, but it takes a long time. Circuit breakers typically last several decades if they don’t face problems like floods or frequent lightning storms. Worn-out circuit breakers may trip more frequently as time passes. However, they can also stop tripping altogether, which leads to electrical dangers. If your breakers have passed the 30-year mark, it’s time to consider an inspection.

While most electrical items can be plugged into a GFCI outlet, some appliances with internal or stationary motors, such as refrigerators, vent fans, and fluorescent lighting, can cause nuisance tripping. This happens because they experience a small, normal amount of current leakage, which can cause the GFCI to trip even when the appliance is working correctly. Although this is not a safety hazard, it can be inconvenient and may cause the GFCI outlet to wear out faster. For this reason, it is often better to plug these types of appliances into a standard outlet. Additionally, electrical circuits over 100 feet long can sometimes cause tripping. Some appliances, like hair dryers, have their own built-in GFCI protection, so connecting them to a standard outlet is fine.