Top-rated contractors.

Get matched with top contractors in Carriere, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Carriere, MS?

Select your specific project to find the pro for you.

Find Contractors in Carriere

Avatar for The Quick Fix
The Quick Fix
5.0(
10
)

Serving Carriere, MS and surrounding areas

In business since 2021

Emergency services offered

"Found Destre on Angi after another contractor came out and completely botched the job. Wanted to replace the weather stripping around rear patio door. The previous contractor ruined the bottom seal on the door and left us with a/c escaping and the flys and mosquitoes coming in. Called and spoke to Destre and he came out within an hour. Surveyed the damage and was off to Home Depot to get replacement parts. Could not find but resourcefully found a clear plastic one. Installed and all has been fine ever since. In speaking with Destre learned his experience in all types of home repair. The thing I liked best is he commented “I will not stop working until the job is completed to your satisfaction”. I paid his quoted price and added a generous tip for his diligence and great attitude. I have finally found my home repairman."
Additional Photos
Recommended by100%of homeowners
...
Showing 1-10 of 74
Unfinished Carpentry questions, answered by experts

Metal stud framing parts include the studs themselves, upper and lower tracks that act as top and bottom wall plates, various angle fasteners and clips, screws for fastening pieces togeher, metal straps, c-channel supports, and thicker steel supporting structures. Roof framing metal components include pre-fabricated trusses, heavy-gauge stud pieces, and various plates and fasteners.

Yes, a one-story house can have a load-bearing wall. The load-bearing walls in a single-story home are usually the exterior walls. If the house has a basement with exposed walls, the arrangement of the beams can help indicate what walls are load-bearing.

Modern brick houses are really stick-built homes with a brick facade for aesthetic purposes only, so most have framing. With genuine brick construction, most homeowners install furring strips over the interior of the brick and then install drywall over those strips to cover the brick wall, so they don’t have traditional framing.

It’s sometimes safe to replace a load-bearing wall with a beam, but you need a structural engineer to sign off on the project. You’ll also likely have to upgrade to a steel I-beam or another material that’s stronger than wood to maintain the level of support you need without the wall underneath.

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

The Carriere, MS homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.