Get matched with top fencing pros in Mahnomen, MN

The ideal distance between fence posts depends on several factors, including the terrain, the purpose of the fence, and the material used. For different types of fences, here are some general guidelines:

• Wood and Metal Fences: Posts should be spaced between 5 and 8 feet apart.

• Vinyl Fences: Spacing can be between 6 and 8 feet.

• Chain-Link, Mesh, or Lattice Fences: Posts can be set anywhere from 4 to 25 feet apart, with 4-10 feet being common for chain-link.

• Wire Fences: Spacing can be up to 12 feet apart.

A horizontal fence is typically more expensive to build than a vertical fence, often costing between 10% and 20% more. The higher cost is due to the need for a higher grade of lumber and more posts to prevent the boards from sagging, which increases both material and labor expenses. Despite the higher price, horizontal fences tend to be more durable and offer a more distinct, modern look compared to the more common vertical picket style. However, they may not be the best option for privacy, as there can be slight gaps between the horizontal rails.

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.