Best fireplace pros near Lamberton, MN

You can safely build a fire pit on your patio as long as you use porous, fire-resistant pavers or a fire pit mat over existing pavers. Otherwise, you’ll need to have exposed ground beneath your pit. You’ll also need to make sure the location for the fire pit is far enough away from your house and any other nearby structures.

If you have a chimney, you need a flue or chimney cap. The right covering keeps rain, debris, and animals from getting into your flue or chimney and causing damage. A flue or chimney cap also provides fire protection. The mesh insert around the cap keeps sparks from flying out of the chimney and igniting leaves and other materials.

You can let a fire burn out in a fireplace as long as you or someone else will stick around to monitor it until it goes completely out. This may take several hours. To prepare, stop adding fuel to the fire well before you’re ready to call it a night. If you’re using the fireplace for warmth, you’ll want to cover up in some blankets as the flame dies down.

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.